Protect your Jeep Wrangler from damage while driving around in rocky terrain with our Jeep Wrangler rock sliders and rocker guards. Located on the lower flanks near the wheels of your Jeep Wrangler, the rockers are arguably the most vulnerable part of the vehicle. That goes double if you intend to take your Jeep Wrangler off road. Rocks, pebbles, and other road debris can destroy your paint job in short order. An easy and inexpensive way to protect this area from damage is to install Jeep Wrangler rocker guards. The rocker side panel sets we sell are made of UV treated thermoplastic and feature a rugged and attractive diamond plate pattern. There are many different types of sets, but each one of our Jeep Wrangler rock sliders and Jeep Wrangler rocker guards are designed to create a shield that keeps stones from damaging your paint finish. They can be installed in different ways, some easier than others. Many of our Jeep Wrangler rocker armor kits go on with simple 3M tape, which means you don’t have to worry about any nuts and bolts at all during installation. Other sets rely on direct bolt-on installation so they don’t require any cutting or welding to get into position.
There are armor kits made from steel or alloy, and others made from thermoplastic. No matter which you decide to invest in they will keep rock chips from being a problem and little rocks and pebbles will be kept down as you tear through all those different trails. Keep your Jeep Wrangler’s paint job pristine and enjoy the enhanced protection that this simple armor offers. We also carry a variety of protective panels and skid plates for your Jeep Wrangler if you’re interested in adding some additional protection to your ride. Consider getting some of our skid plates to avoid major impacts on the lower end of your Jeep Wrangler while off-roading. Adding on body armor panels is another way to protect against scrapes, scratches and impact and most of those panels go on in minutes as well. There are many different ways to protect your Jeep Wrangler from harm, and most of those options also help accent your ride and give it a tougher look. Use these tools as a way to dress up your Jeep Wrangler, and you just might keep it from being damaged in the process. Most of our kits are affordable, and adding just a few pieces of Jeep Wrangler rock sliders or body armor is all it takes to keep your Jeep Wrangler in good shape over time.
Jeep rock sliders or Jeep rock rails are another way to protect your Wrangler’s body without sticking armor panels on. Rock sliders are a type of running board designed solely to take side impacts. The tend to feature steel tubing bent upwards away from the body to form a sloped shield for your Jeep’s panels. Jeep Wrangler rock sliders are not side steps and aren’t designed for such use. Designated side steps will have textured surfaces to prevent you from slipping whereas rock sliders are supposed to be smooth.
- 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2018, 2019 & 2020 Wranglers.
- Rubicon, Sahara, Sport S, Sport, Unlimited, Islander, Rocky Mountain, Renegade Wranglers
*Please see product pages for any exceptions.