Barricade Enhanced Rubi Rails; Textured Black (07-18 Jeep Wrangler JK 2 Door)

Video Review & Installation

Hey, guys. It's Sara from extremeterrain.com. And today we will review and install the Barricade Enhanced Rubi Rails, fitting your '07 through '18 two-door Jeep Wrangler JKs. These Rubi Rails feature a heavy-duty steel construction with a textured black powder coat finish. This is for those Jeep owners who do not have Rubi Rails from the factory or who wanna add this nice stepping feature to their Rubi Rail. So, these are more visual modification rather than body armor. They will protect against door dings, but because of the way they're mounted, they're not gonna offer much underbody protection.However, these are gonna work great for those of you who are looking to finish off the look of your pinch weld and to this nice stepping feature to your Jeep. Coming in at around $240, these will finish the look of your JK for less than the price of a factory Rubi Rail and they come with this handy step. I'm giving this install a two out of three wrenches on the difficulty meter. It can be done in approximately two hours and features direct bolt-up installation. All right. With that said, let's jump right into our install.For this install, we used: A 10-millimeter ratcheting wrench, a 13-millimeter deep socket, and an impact gun.All right. So, the first step in our install is to line up the studs with the holes on our pinch weld and then get the nuts threaded on the backside. This should hold our Rubi Rail in place so that we can attach the bolts from underneath. Make sure you use a washer on the backside of these studs before you use the nyloc nut. Repeat that with the back two studs on your Rubi Rail. Next up, grab your medium-sized hardware and thread it into this threaded hole on the bottom of your Jeep. If your Jeep does not have a threaded hole, there is a threaded clip that you can use with different hardware in this kit. Grab your 13-millimeter socket and tighten this down. Repeat that with the other bracket. Grab your 13-millimeter socket and tighten it down. Grab your 10-millimeter ratcheting wrench and tighten down the nuts holding our Rubi Rail to our control.All right. That is gonna do it for the review and install of our Rubi Rails. Remember, for all things Jeep, keep it at extremeterrain.com.