Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$4,500 Giveaway! 3 Winners Enter Now

RedRock 4x4 Rocker Guard - Textured Black (07-18 Jeep Wrangler JK 4 Door)

Item J100187
Call a Wrangler Enthusiast at 1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $318.99 You Save 11% ($34.00)
Our Price

$284.99 (pair)

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock  

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Rocker Guard
    • Heavy Duty Tubular Steel
    • Black Powder Coat Finish
    • 72 lbs
    • Protects Sides and Undercarriage
    • Bolt-On
    • Fits 2007-2018 Wrangler JK 4 Door

    Review & Installation Video

    Review & Install Video

    Hey, guys. I'm Ryan from extremeterrain.com, and this is my review of the RedRock 4x4 Rocker Guards, fitting all 2007 to 2016 JKs.RedRock 4X4 offers these for both two-door and four-door Wranglers. These rocker guards are for those of you who have a factory side step and are looking for something a little stronger for off-roading, or are looking for a step that is high and tight up against the body, and does a good job of hiding the pinch seam. These are going to be stronger than those factory side steps or tubular steps, but they're not quite as strong as frame mounted armor. So, if you're doing light to moderate wheeling, these are going to be a good option for you. The nice thing is that they're also priced accordingly, so they're going to save you a little bit of money over more stout armor. These are built with tubular steel that is 0.12 inch wall thickness, and 1.75 inches diameter. You can tell when you look at the welds and especially when you pick these up, that they're built strong. The four-door weigh in at 72 pounds, and the two-door at 53 pounds. And they're both finished off with a textured black powder coat that is both corrosion and rust-resistant. These rocker guards you'll install just like a factory side step, to the pinch seam and the underside of the tub, so there's no drilling necessary. They're completely bolt-on. As far as tools, you'll need a set of sockets and all the hardware necessary is included in the box. The entire install will take about two hours from start to finish. These are really well priced for what you get. They're definitely more affordable than some of the stronger frame mounted armor, and they still offer a great step. All in all, this is a solid product at an affordable place. I'd recommend these rocker guards for anyone who needs some additional protection for light to moderate wheeling, is looking for a useful step and wants something that looks good and covers that pinch seam. You get all of that at an affordable cost, and an easy bolt-on installation.Remember, if you do some more serious off-roading, you'll want to look at some of our stronger frame mounted armor. So, that's my review of the RedRock 4X4 Rocker Guards, for both the two-door and four-door JKs that you can find right here at extremeterrain.com.

    Aggressive Off-Road Styling. RedRock 4x4 Rocker Guard gives your 4-door JK Wrangler an aggressive off-road appearance while providing practical undercarriage and side protection from brush and other trail hazards.

    Heavy Duty Construction. Manufactured from heavy duty 1.75" diameter (0.12" wall thickness) steel tubing, this RedRock 4x4 Rocker Guard is completed in a textured black powder coat finish for aggressive good looks and long lasting corrosion resistance.

    Easy, Bolt-on Installation. The RedRock 4x4 Wrangler Rocker Guard is engineered to be a direct bolt-on upgrade using just basic hand tools, so there is no drilling or cutting required for a clean straight forward installation.

    Application. This RedRock 4x4 Rocker Guard is designed to fit 2007-2018 Unlimited (4-door) Jeep Wrangler JKs. Includes driver and passenger side.

    RedRock 4x4

    Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

    MPN# J100187

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (1) Driver Side Rocker Guard Assembly
    • (1) Passenger Side Rocker Guard Assembly
    • (6) 10mm Nut Plates
    • (6) 10-1.5mm x 35mm Hex Bolts
    • (6) 10mm Lock Washers
    • (6) 10mm x 34mm OD x 3mm Flat Washers
    • (6) 8-1.25mm x 35mm Hex Bolts
    • (6) 8mm Lock Washers
    • (6) 8mm x 28mm OD x 3mm Flat Washers
    • (12) 6-1.0mm x 25mm Hex Bolts
    • (24) 6mm x 22mm OD x 2mm Flat Washers
    • (12) 6mm Nylon Lock Nuts
    Installation Info
    Tech Specs
    Will it fit my Wrangler?

      Customer Photos (43) Submit Your Photo

      View All 43 Photos

        Questions & Answers (11)

        5 Top Rated Questions

        Do these weight 53 pounds each or 53 pounds together?

        • That is the total weight of both rocker guards.

        Helpful (3)

        Are there end caps on or are the ends open?

        • The ends are not open and are just part of the bar itself. If you take a look at the install video on the product page here, right around 3:55 you will get a good shot at that piece of the piping.

        Helpful (1)

        When i click on the product, it shows price as a (pair) but then it changes to (each). Is the price displayed for the pair or for each?

        • Thank you for your question! The price displayed on the product page is for the pair.

        Helpful (1) Show 1 more answer

        I'm planning on ordering these rocker Guard along with a rugged ridge tube front bumper (J15648) and a smittybuilt rear bumper (J17266). How well do the textured black finishes match up?

        • Hello, the textured black finishes should be very similar, but since you are getting different brands, we wouldn't be able to guarantee you they would match up 100%.

        Helpful (1)

        Do they flex and hit the body. And will they hold up to light rock crawling

        • The RedRock 4x4 Rocker Guard will not hit the body in normal use, however if hit hard enough they may bend which could possible cause them to contact the body.

        Helpful (0)
        Post Your Question
        6 More Questions
        Can I use these as a High-Lift Jack point? 1 answer
        What's the front bumper on the model Jeep in the pictures? 1 answer
        Do these rails also act as a side step? 1 answer
        how much weight can these withstand and would these break if slide my jeep across a rock 1 answer
        Hello, I have 2016 Willy's with factory rock rails? Do those rock rails need to be removed to install redrock rocker guard? 1 answer
        Are these frame mounted? I'm looking for a good set of rocker guards for my 15 2 door and want frame mounted, I do not want to damage or drill into my tub. 3 answers

          Customer Reviews (100+) Write a Review

          Ratings Summary

          4.6 out of 5 overall rating from 100+ customers

          Installation Time: Less than 1 Hour

          Installation Cost: $100-$250





          • December 08, 2019

            5 2011 Wrangler - ChrisMcc Installation Time: Afternoon

            Great price ang great looking

            These meet my needs, good looking and functional. Took about 2 hours to install. Jeep didn’t have the threaded holes as video shows, but the install kit has pieces to help. It’s ipa pain to set them, but once in works great.

            Helpful (1)
          • September 03, 2019

            4 2016 Wrangler - jmv

            Not bad! Good bang for your buck

            received the rock sliders with a little scrape. Good response time with CS and making it right. Instructions were written by a baboon, might as well throw it away. Lots of hardware not needed. Had to watch a different video for install a few times to figure the hardware pieces. No help needed other than a chair to hold and line up the ends while bolting it underneath. We'll see if this holds up on the trail.

            Helpful (1)
          • August 07, 2019

            5 2013 Wrangler - TravisF Installation Time: Less than 1 Hour

            Recommend

            Easy install and looks great. They’re made of good quality, serve as great protection and a decent step. I definitely like how they hide the pinch seam so well.

            Helpful (1)
          • July 31, 2019

            4 2015 Wrangler - KevinKevinKevin Installation Time: Afternoon

            Looks Great

            Shipped quick via freight. Bolt on installation. Recommend using a hydraulic floor jack to hold and finagle into perfect fitment. Had to slightly bend one edge of the mounting bracket. Product looks awesome. Very pleased.

            Helpful (1)
          • July 24, 2019

            4 2010 Wrangler - Mvc46 Installation Time: Afternoon

            Okay

            Passenger side dragged along a big rock from front to back and it held up very well!

            Helpful (2)
          • May 21, 2019

            5 2007 Wrangler - EmmitP Installation Time: Less than 1 Hour

            Love them

            These were easy to install, they look great, and had all of the hardware required for the install.

            Helpful (2)
          • May 12, 2019

            5 2008 Rubicon - TROBERTS Installation Time: Less than 1 Hour

            RedRock Rocker Guard

            The rocker guards are very nice and easy install. Priced right and great quality

            Helpful (1)
          • April 10, 2019

            5 2012 Wrangler - EarleneW Installation Time: Less than 1 Hour

            RedRock guards

            I love how easily they installed and look forward to the protection they provide.

            Helpful (1)
          • April 09, 2019

            5 2009 Wrangler - Moonshine Installation Time: Less than 1 Hour

            Amazing

            Totally changed the look of my Jeep. Good quality. About a hour to put them on. Had to do some research on installing. I have a x model. And you don’t use all the hardware that they provide. It depends on the bottom of you Jeep!

            Helpful (1)
          • April 04, 2019

            5 2016 Wrangler - TeeS Installation Time: Less than 1 Hour

            Mz.Tee

            Great look, easy install, guard, step ...let’s ride!

            Helpful (1)
          • March 28, 2019

            5 2008 Wrangler - rbateman Installation Time: Afternoon

            GREAT PRODUCT

            GREAT PRODUCT, TOOK ABOUT 1-1/2 HOUR TO INSTALL. WOULD RECOMMEND AN EXTRA HAND

            Helpful (0)
          • March 25, 2019

            5 2017 Wrangler - 1008 Installation Time: Less than 1 Hour

            Great

            Very easy to install and a great product for the price. Took less than an hour to install both guards. Instructions were pretty vague but it wasn’t too hard to figure out. I love the way they look! Overall a great product that I’d recommend to anyone!

            Helpful (0)
          • March 20, 2019

            5 2014 Wrangler - Jmaraccini Installation Time: Less than 1 Hour

            I’m happy

            Very easy install, looks and works great. Took maybe 1hr to get them installed since I had to take off the old ones.

            Helpful (0)
          • March 11, 2019

            4 2012 Wrangler - Shane247 Installation Time: Less than 1 Hour

            Very nice.

            Some of the powder coating had been scratched off in a couple places from shipping, but overall they're pretty solid and look great on the Jeep.

            Helpful (0)
          • March 10, 2019

            3 2008 Wrangler - JamesA Installation Time: Less than 1 Hour

            James A

            To date the only "bad" experience with Extreme Terrain. One of the guards was damaged - there was a pretty big gouge I noticed after I took the protective plastic off. Unfortunately, I already had one installed and have plans to go out early this morning. The instructions both on paper and on-line were less than adequate. Once I was able to visualize how the bolt holes lined up with the jeep holes it was fairly apparent what needed to happen. Of course a half a dozen extra bolts/nuts/washers (I assume for another application) in the kit just added to the initial confusion. After a good 20 minutes of trying to figure the parts out, the install went quick. Did it alone with the help of two jack-stands. Took less than an hour - not including the initial 20 minutes of confusion.

            Helpful (0)
          • March 05, 2019

            5 2009 Wrangler - DannyH Installation Time: Less than 1 Hour

            Redrock rocker guatds

            Easy install and look great. Did it by myself in less than an hour. Hardest part was removing factory steps that were installed.

            Helpful (0)
          • February 28, 2019

            5 2007 Wrangler - PedroG Installation Time: Less than 1 Hour

            These is what I was looking for

            Good product. Right price. My jk looks great. 100 recommended

            Helpful (0)
          • February 28, 2019

            4 2016 Wrangler - DanL Installation Time: Afternoon

            easy peasy

            Two 5 gallon buckets support the rocker guards at exactly the right height for one person installation.

            Helpful (0)
          • February 26, 2019

            3 2017 Rubicon - ZacharyS Installation Time: Less than 1 Hour

            They work, but don’t fit 37’s

            Like the title says they’ll need to be cut to fit 37’s, my passenger side front has pushed up to my rocker panel but no damage. Definitely good for a light duty Jeep on 35’s, if you plan on using them heavily I would try a different rocker guard

            Helpful (1)
          • February 22, 2019

            4 2016 Wrangler - MJ Installation Time: Afternoon

            Sliders not steps

            These are great for what they are made for. If you are looking for a step get something else. These took a decent beating and didn’t even chip. They are heavy I installed myself I used my gas can to hold up one end while I bolted the other end on. Took me about 90 mins. They are heavy about 35lbs each. They feel solid. Will update after I beat them up some more.

            Helpful (2)

          Related Wrangler Categories