(approx) 2 Hours
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 05, 2019
Great look, easy to install
Very straight forward install, and makes a huge difference on the look.Helpful (1)
November 22, 2019
I installed this bumper a few months ago, during the summer. I was looking over the bumper when I installed a set of lights and noticed that one of the welds on the hoop is rusting at the point it welds to the plate on the drivers side. This bumper is only a few months old. Yes, it is well built but the quality of the paint job leaves something to be desired.Helpful (0)
November 08, 2019
Perfect fit, relatively easy to install
Great looking stubby bumper. Relatively easy to install. Would buy again. Quite solid yet not too heavy.Helpful (0)
November 05, 2019
This bumper was a great and easy install. Love the look and hopefully over time it will hold up and get the job done.Helpful (0)
October 04, 2019
Cool product, but..........
This bumper is now on my 2008 JK but not without an issue. The bumper package arrived in perfect condition. No scratches or paint issues whatsoever. Packaging was well done. The one problem is manufacturing quality control. When installing the bumper, everything was going on easily, until the two bolts on the drivers side. There are two nuts that are welded to the back of the mounting plate that were not centered when they were welded on, making it impossible to drive the bolts in. It was a rather easy fix to drill out the mounting plate holes with a larger bit and allow the bolts to be installed. But it shouldn't have happened in the first place. Looking at the holes it was totally obvious that the bolts were never going to be able to be installed without some modification. I posted a picture showing the offending holes. The nuts on the opposite side were perfectly aligned. Overall this added 45 minutes to the install that didn't need to happen. But in the end I was able to overcome the situation and it looks great on the Jeep.Helpful (0)
September 29, 2019
Great bumper for the price.
Fairly easy install but I did have a problem removing one bolt from the factory bumper. Missing some nuts and bolts for the fog lights but I'm happy with the finished product.Helpful (0)
September 05, 2019
Very easy to install and love the new look it gives to the front end. And paired with the red rock 12,000 winch it looks even better.Helpful (0)
August 13, 2019
you get what you pay for
you get exctly what you pay for and honestly it looks way better than what i imaginedHelpful (0)
August 10, 2019
For the cost, you couldn't ask for a better product. I put this on my 07 Wrangler with my dad in about 1 1/2 hours. The longest part of the process was removing the factory bumper due to the clips being stuck. Eventually, we used a flat head and a hammer to break the clips. After that, the bumper was on in 30 minutes.Helpful (0)
July 29, 2019
A little difficult to know which bolts belong where, but once you figure it out, it looks pretty darn goodHelpful (0)
Will the factory fog lights bolt right up in this bumper?
Factory fog lights are compatible with this bumper.
Do you have to relocate the vacuum pump to get this installed?
This bumper will not need to have the vacuum pump relocated.
what does this bumper weight
This bumper weighs approximately 72 lbs.
Will the Westin 30 in. LED Light Bar Front Bumper Mount (Item J104581) work with this bumper???
This bumper is not designed to hold a light bar, the tabs on the bumper are for individual offroad lights. Modification may be needed if attempting to install a light bar on this bumper.
Can the bar be removed and bumper ran without it?
Yes, the bar can be removed and the bumper used without it.
Yes, cube lights can be used with this bumper. Keep in mind that additional mounts may be required based on exact desired setup.
One would need to find an aftermarket license plate mount. For example, a winch-mount would work, item J109043.
This will work with both halogen and LED fog lights.
Unfortunately, we do not have any skid plates that are confirmed to work with this bumper without any modification.
Unfortunately the 12,500 lb winch would not work.
There would be no further components needed as this bumper features a built-in winch plate.
The bumper doesn't come with provisions for a license plate. Depending on the type of winch you choose, you can mount a license plate using a fairlead license plate bracket.
TheRedRock 4x4 Attack Stubby Front Bumper will use factory sized fog lights as shown in the install video.
(approx) 2 Hours
Simple installation for anyone.
What's in the Box