Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!
Win N-Fab Side Steps! Enter Daily!

Teraflex Dana 30/44 High Steer System (97-06 Jeep Wrangler TJ)

ExtremeTerrain no longer carries the Teraflex Dana 30/44 High Steer System (97-06 Jeep Wrangler TJ). Please check out Jeep Steering for an updated selection.

Features & Details

  • High Steering Conversion Kit
  • Heavy-Duty Construction
  • Rugged Cast Steer Knuckle
  • For Use with Dana 30 or 44(03-06 Rubicon) Front Axles
  • One Ton Tie Rod Ends
  • For Use with 5+ Inches of Suspension Lift
  • Fits 1997-2006 Jeep Wrangler TJ and LJ Models
Improved Steering. The TeraFlex high steer system was originally designed to be used with TeraFlex's top-of-the-line suspension system - the MAX-LCG, which uses a front 4-link triangulation (eliminating the trackbar). The High Steer Kit is essential in that application. Many Jeeps with more than 5 of lift while still utilizing a trackbar system would benefit from a high steer solution.

High-Quality Construction. This Teraflex kit will beef up the essential steering components of your Dana 30 or 44(03-06 Rubicon) front axle. The system includes a HD tie rod and drag link with one ton tie rod ends and tapered inserts, and the HD cast high steer knuckle.

Installation. Teraflex's Dana 30/44 High Steer System is not an all-inclusive kit. It is recommended to have prepared solutions to possible modifications that aren't included with this kit. Possible solutions are provided on the manual. You may need assistance from a professional or some mechanical knowledge for the installation process.

Application. This Teraflex Dana 30/44 High Steer System is specifically designed to fit on 1997-2006 Jeep Wrangler TJ models with 5 inches of up lift and the Dana 44 front axle on 2003-2006 Rubicons.

Note: The high steer system is not an all inclusive kit. Additional modifications will be required that are not included in the TeraFlex high steer system. These modifications may include front swaybar links, front trackbar mounting, and offset wheels.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) High steer knuckle
  • (1) HD tie rod
  • (1) HD drag link
  • Tie rod ends
Installation Info
Tech Specs
Will it fit my Wrangler?
  • TJ Rubicon 2 Door - 03, 04, 05, 06
  • TJ Rubicon Unlimited 2 Door - 05, 06
  • TJ Wrangler 2 Door - 97, 98, 99, 00, 01, 02, 03, 04, 05, 06
  • TJ Wrangler Unlimited 2 Door - 04, 05, 06

    Customer Photos

      Questions & Answers (1)

      1 Top Rated Question

      The description says dana 30 but the details say dana 44 which is it?

      • Thank you for your question! This Teraflex Dana 30 High Steer System kit was designed for the Dana 30 front axle, models 1992 and newer; and the 2003 + Rubicon front 44.

      Helpful (0)
      Post Your Question

        Customer Reviews (4) Write a Review

        Overall Rating 4.2

        out of 5 stars

        • Fit 4.5 4.5
        • Bang For Your Buck 4 4



        • 3/5

          May 24, 2017

          d3hs

          the product is very cool looking under the jeep the only problem I have is that the rubber boots on the tie rod ends are weak just put grease in them drove home looked again there and theres a bunch of pin hole leaks:( ?????? not the quality rubber you think u would get for spending almost $700 so im a bit annoyed and disappointed hope all else is quality no problems yet.

          whitejeeplj

          Year: 2006Submodel: Wrangler Unlimited

          Helpful (13)

        • 5/5

          May 12, 2017

          TJ Rebuild

          An easy way to lift up linkage out of harms way. Good heavy linkage.

          MichaelM

          Year: 2001Submodel: Wrangler

          Helpful (12)

        • 5/5

          August 21, 2015

          Teraflex high steer

          This steering is awesome! It feels as if it's just more contorl over my jeep, seems as if it's got more turning radios also. It was very easy to install and fit well. there is no way to go wrong with this product the hardest part was removing the stock spindle. Other than that it's is a walk in the park. Allighnment was very easy a 1 1/4" for the rod ends and 1 1/2" wrench for the rods. I have had the steering for around 3 months now and have no complaints about the product is very durable and a lot bigger in person than in pictures. You will be amazed by the pure stature and wow factor of this product. But I DO NOT have a stock lift (5"rough country)so I could not tell you how it would fit although I did have to cut the sway bar mounts off the steering sits very close to Dana 30 but has all the clearance that it needs to turn fully.

          Extraordinaire

          Year: 1997Florida, USA

          Helpful (13)

        • 4/5

          January 17, 2013

          Product fit well and did its job

          I put this kit on my yj with SOA and its helped with my steering issue tremendously. The geometry is much better now with almost parallel drag link and tie rod.

          Jeepn95

          Year: 1995Northern California

          Helpful (15)