No More Front-End Sway.
This steering box brace connects both sides of the frame at the front end, resulting in reduced sway and less wear and tear on the frame. Whether you're prone to making sharp skidding turns or prefer oversized tires for mud traction, this brace stabilizes the steering control zone without requiring you to make major modifications. Go Farther.
This bar is specifically designed to fit the 4WD version of the Jeep Wrangler TJ model. Over time, vibration in the front end can lead to a lot of play in the steering wheel, which means you're turning harder than necessary. Tightening up that sway and play is as simple as adding this box brace to your undercarriage and getting back out there. You'll immediately notice increased stability and smoother handling, especially at high speeds. Tough Construction.
Bracing the frame is a tough job, but this device is designed to take the shocks. Solid bar construction and tough mounting hardware, such as naturally strong U-bolts, ensure that it can handle rough landings and daily stresses alike. Installation.
Some steering box braces require welding or frame modifications. This model is much easier to install. You simply drill a few pilot holes, bolt on the bar, and tighten it. The work should take no more than half an hour. Application.
This Rough Country Steering Box Brace is designed to fit 1997 and 2002 Jeep Wrangler TJ 4WDs.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov