G2 Axle and Gear Dana 30 Front Axle/44 Rear Axle Ring and Pinion Gear Kit; 5.13 Gear Ratio (07-18 Jeep Wrangler JK, Excluding Rubicon)Find parts that fit my vehicle

G2 Performance. Swapping out your stock tires for a larger set may seem like a simple task. However, if you want to add larger rubber to your rig, you should really upgrade your axle gears at the same time to compensate. Not only will you enjoy and feel a difference in power, but your 2007-2018 Jeep Wrangler can even improve some of the MPGs lost by the larger tire upgrade. Install those much desired larger tires and rock crawl with ease with the installation of these 5.13 G2 Gears.

Quality Construction. Made from 8620 heat treated steel and manufactured to meet factory specifications, the tight tolerances of these Performance Series Ring and Pinion Gears provides easy set up and keeps noise levels low. Protected by G2's 10-Year Warranty, you know you're receiving the ultimate in strength and quality.

Re-Gearing. When you increase the diameter of your tires, the engine has to work twice as hard to turn them. Naturally, that will lead to increased fuel consumption and reduced performance. Anytime you re-gear your rig, you can regain lost acceleration, performance and fuel economy.

Application. The G2 5.13 Performance Ring and Pinion Gears are designed to work on 2007-2018 Jeep Wrangler JK, excluding Rubicon models. Please choose from the options above to order the Dana 30 - Front Reverse Gears only, the Rear Dana 44 Gears only or both the Dana 30 - Front Reverse and Rear Dana 44 Gears as a set.

Application Note. The Dana 30 5.13 Gears will require the use of a 3.73 and numerically higher carrier or an aftermarket locker. Upgraded carrier is required as factory carrier is not compatible.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov