G2 Axle and Gear Dana 44 Front Axle/44 Rear Axle Ring and Pinion Gear Kit; 4.56 Gear Ratio (07-18 Jeep Wrangler JK Rubicon)Find parts that fit my vehicle

G2 Performance. Most every Wrangler owner has the desire to upgrade their tires to something bigger than stock. Don't lose any MPGs or performance by upgrading to G2 Axle Gears at the same time. These 4.56 Gears will allow you to climb those long or steep hills without fear of going into dreaded limp mode. Not only will you feel the difference in power after upgrading to larger tires with these gears, but your 2007-2018 JK Rubicon can even improve its fuel economy. Go ahead and install those much desired larger tires and rock crawl with ease with the installation of these 4.56 G2 Gears.

Quality Construction. Made from 8620 heat treated steel and manufactured to meet factory specifications, the tight tolerances of these Performance Series Ring and Pinion Gears provides easy set up and keeps noise levels low. Protected by G2's 10-Year Warranty, you know you're receiving the ultimate in strength and quality.

Re-Gearing. When you increase the diameter of your tires, the engine has to work twice as hard to turn them. Naturally, that will lead to increased fuel consumption and reduced performance. Anytime you re-gear your rig, you can regain lost acceleration, performance and fuel economy.

Application. The G2 4.56 Performance Ring and Pinion Gears are designed to work on 2007-2018 Jeep Wrangler JK Rubicon models only. Please choose from the options above to order the Dana 44 - Front Reverse Gears only, the Rear Dana 44 Gears only or both the Dana 44 - Front Reverse and Rear Dana 44 Gears as a set.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov