(approx) 1 Hour
Simple installation for anyone.
$349.99 (each)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Off-Road Protection. The Barricade Off-Road Front Skid Plate for 2007-2018 Wranglers provides additional undercarriage protection for your Jeep's front axle, sump and engine, even when traveling down the roughest trails with a rugged steel construction.
Heavy Duty Construction. Manufactured from heavy-duty stainless steel for it's long lasting durability, this Barricade Off-Road Front Skid Plate is completed in a bright polished finish for classic good looks and long lasting corrosion resistance.
Easy, Bolt-on Installation. The Barricade Off-Road Front Skid Plate is engineered to be a direct bolt-on upgrade for the original stock factory bumper using just basic hand tools, so there is no drilling or cutting required for a clean straight forward installation. However, aftermarket bumpers may require some modifications for proper installation.
Application. This Barricade Off-Road Front Skid Plate is specifically designed to fit 2010-2018 Jeep Wrangler JK models equipped with an original stock factory bumper or a Barricade Trail Force Bumper.
Technical Note. The Skid Plate can work on most aftermarket bumpers, but some slight modifications are require for proper fitment.
Fitment: 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
March 06, 2020
Once installed looks great
Looks great easy to install as long as you remove bumper.Helpful (0)
February 23, 2020
Doesn’t fit all barricade bumpers
Did not fit with the extreme HD bumper due to the lower winch mount. I was able to cut it and modify to make it workHelpful (1)
February 23, 2020
Looks great. Once I added my front bumper this is just what it needed since the factory skid plate wouldn’t fit. It matches my bumper and definitely makes my Jeep look better. Looks like it’s part of the bumperHelpful (1)
February 04, 2020
Brought to replace flimsy air dam.
The good: This is heavy duty and looks good. I just about tore off the factory air dam while backing up in tall grass. This will provide some protection and style. The bad: I had no intentions of replacing the factory front bumper and the description did and still does say iit will fit. It would have taken major modifications to the bumper that would have greatly weakened it. I either had to return the skid plate or buy a bumper that would fit. I choose the later due to the fact that getting the factory bumper off was a pain due to lock nuts and access to them. The installation was easy otherwise.Helpful (2)
December 29, 2019
Looks nice and sturdy but
On my 2014 jeep Rubicon one of the holes for mounting it did not line up and nomatter what you may be told it will not work with barricade extreme hd front bumper without modifying if you are willing to do so tho it looks and so far functions nicelyHelpful (2)
November 19, 2019
Product is great overall, the pictures of the install are deceiving in that it appears to give protection to the steering, when in fact, once it is installed, it is above them and does not afford protectionHelpful (3)
November 18, 2019
Looks great but a little difficult to install.
I had previously purchased this skid plate and had it on my 2007 JKU Sport with no problems and it looked great. I recently bought a 2010 Rubicon and have been swapping my upgrades over to the Rubi. Surprisingly, it was quite a bit more difficult to reinstall this skid plate on the 2010. I'm not sure why as the body styles is the same. It did not fit as flush on the 2010 as it did on the 2007 and did have to drill a hole in a spot on the crossmember for a fastener that was a preexisting hole on the 2007, but not the 2010. I also had to get some longer bolts to connect the lower attachment points to the lower frame mounting points(2). It all worked out eventually but was a little frustrating along the way. Now, were good to go and it looks great and provides nice protection for the area below the bumper there in front.Helpful (2)
November 09, 2019
I had a hard time finding a skid plate that would work with my DV8 front bumper. This worked well. I had to do some grinding to make it fit on the top bolts. There was not enough room between the frame and the bolt to fit the skid plate. BUT, I love the way it looks.Helpful (2)
October 12, 2019
You should use washers on the other three, six in total, places to fill in the gap that the skid plate makes so it’s even. If not it tilts upward just a hair. Very hard to reach some bolts if you don’t have the correct set up. After installing. All I could think of is if you need to do some work under there. Like mess with the lights or wires ,etc. Man! Your gonna have to take all that off cause there’s no room to work.Helpful (4)
October 07, 2019
Yes, it's excellent, yes, its a good value, yes Barricade products are great - but: It will make the bumper point upwards. They should have added spacers for the the top bolt. When you add a light bar, you need to make special adjustment to have light point straight. I slid two washers behind each mounting hole when I noticed the tree tops were being lit as opposed to the road.Helpful (2)
Write up states this works with the original factory bumper. Video says it won't. ???????
This Barricade Off-Road Front Skid Plate is specifically designed to fit 2010-2018 Jeep Wrangler JK models equipped with the factory bumper or a Barricade Trail Force Bumper.
Will this product become available in black or textured black finish to match the barricade bumpers?
The skid plate is currently unavailable in the black and textured black, hopefully we will have these back soon! As of right now, we do not have an ETA of when these skid plates will be back.
Will the Barricade Front Skid Plate fit with the Barricade Adventure HD front bumper?
Yes, this skid plate will fit the Barricade Adventure HD front bumper.
Will this skid plate fit with my rough country mid width bumper?
The Barricade Front Skid Plate is designed specifically for Barricade Trail Force bumper, and OEM bumpers. Use on other bumpers have not been tested, and may not work, or may require modification.
Must the bumper be removed to install the skid plate?
The Barricade Front Skid Plate will require the removal of the bumper to allow access to the forward mounting points.
This skid plate is 3/16" thick and the price difference comes from the finish used on these skid plates.
This skid plate has not been tested for fitment with that bumper.
We do not offer a skid plate for that bumper.
Unfortunately, Barricade has not provided the width measurement, however it is 19" wide in the packaging, if that helps!
This Barricade Off-Road Front Skid Plate is specifically designed to fit 2010-2018 Jeep Wrangler JK models equipped with the OEM factory bumper or a Barricade Trail Force Bumperonly. This Skid Plate will not fit with any other brand or model of bumper.
This will work with the Barricade Trail Force HD bumper.
Yes, you can use this skid plate with the Barricade Extreme HD front bumper.
The Barricade Front Skid Plate will fit the Hard Rock Steel Bumper but may require slight modification if using a winch and winch plate. This will slightly angle the bumper, however, spacers or washers can be used on the upper bolts to level out the bumper.
We have not verified use with the Rugged Ridge bumpers but may work with some modifications.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box