Difficulty Level:Simple installation for anyone
Fitment: 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
Difficulty Level:Simple installation for anyone
Could it be mounted anywhere along the roll bars? As in Overhead above drivers/passenger seat? All the pictures show it mounted in the back, so I'm just curious.
Hello, you should be able to mount this along any part of the Roll Bar, but we would highly recommend not mounting the Jack above any Passengers head. That would be very Dangerous.
Would a 42" jack be too short to to mount inside my TJ?
Yes, the distance between the two roll bar rails is larger than 42" and would require a 48" jack at minimum to fit.
Would this mount work with a 60" Hi-Lift jack?
Hello, as long as the base of your jack has the correct measurements, which are: 8 Inches by 6 Inches by 6 Inches, it should work fine.
I am wondering if it is possible to use these brackets with a jack bag as I would rather not leave the jack exposed... also I planned the use of bungee cables inside a protective bag to reduce any rattling noise the jack might make if possible.... is it?
Hello, unfortunately because how the jack is mounted you would not be able to use a bag to go over it.
Will this work with a soft top? Will this allow use of the soft top?
This mount doesn't interfere with any factory top mounting locations but may interfere with folding a factory top down. Aftermarket tops or fastback style tops will likely not work in conjunction with this mount.
June 30, 2018
Like them so much bought 3 sets now have all 3 jeeps with them mounted inside for easy use
Bang for your Buck 5
November 14, 2017
Quick install and well built holds my hilift jack well
September 10, 2017
Secure interior Jack mount
Did not want to have my jack out side my Jeep and this was the perfect solution! Mounted a little higher on my roll bars. ( in line with my back seat height ) so I still access my storage space. Clear view from rear view mirror out back window. As far as rattle goes... I just put some small foam pieces in the appropriate places . No more rattle nice quite ride. Highly recommend. In cab security for my 48" hi lift jack.
August 29, 2017
The mount fits very well. Secures to the rollbar with no squeaking or rattling. Happy to recommend.
February 09, 2017
Easy installation and structurally sound
The is easy to install, just need to check alignment and length Jack prior to install
October 06, 2016
Roll bar Jack mount
Love it the instalation was easy. It's a perfect fit. A great way to store my Jack out of the weather and keep it secure.
July 22, 2016
HI Lift Mount
Simple and easy to install. U-bolts have a rubber like coating, does not move, rattle or scratch the vehicle.
July 14, 2016
It works...sort of
The off road jack roll bar mounting bracket works really well at holding my high lift jack in place. I have taken it off road multiple times and have had no problems with it sliding around, however with the jack being inside the vehicle during on road driving it does rattle a lot so for those people that don't like rattling be warned. This product also stops the soft top from fully collapsing in a neat and organized way. I now just fold the top back and it has to rest on top of it which works just fine but doesn't look as neat. i would still recommend this product as these are only very minor issues to me.
June 30, 2016
I bought it and put it on my 15 wrangler and bought a 48' jack and the thing rattles up a storm not worth the money
March 07, 2016
Better off fabricating your own...
Way too expensive to brackets that are soft metal and I had to drill another hole to get it to fit. Better offnfotnthe money buying a clamp and brackets at hardware store.
January 25, 2016
Easy to install
This item was easy to install on my TJ. I did have to trim some foam padding on the roll bar to allow easy access but once done the item fit perfectly. Now I just need the highlift jack that is on back order!
January 11, 2016
This jack is outstanding and works perfectly for my 48inch jack. This jack mounting bracket is easy to install. This is a great product.
September 29, 2015
Jack mounts don't fit
They don't fit on my jeep because the seat belt reel cover is right where they say the mounts should be placed and if I put it any higher up it won't fit over my roll cage padding so that was frustrating
May 15, 2015
Easy to install and works great. Thanks
The product is a good price an quick an easy to install. Keep bringing good product to sell.
April 01, 2015
After looking around at other products it came down to this one and I have no regrets. This mount is sturdy and stylish keeping it safe from both the environment and thieves. It was worth the price right away knowing it would protect my Jack for a much longer time vs. keeping it outside of the cab.
March 16, 2015
easy to install and great quality
I liked the idea of storing the hi-lift inside the jeep instead of outside and having to worry about theft. this mounting bracket works great for just such a purpose. I had it installed in 10 min and the 48 jack fits great.
February 19, 2015
This mount is nice and sturdy with no rattles. It fits great on an unlimited with a 48" jack. The u-bolts are a little long and I might trim them down this spring. Seems like the mount won't be in the way as it tucks up nice to the tailgate. It's a little pricey but I don't regret the purchase.
January 29, 2015
Great Placement for a High Lift Jack
I was looking for a mount for my 48" High Lift Jack and liked the looks of a few others. But didn't want to give thieves a chance to take it. Found this one that mounts on the inside where they would have to brake the back glass of the my hard top to get to it and that's if they even see through the tint on the glass. Loving the mount and a perfect fit for my 48" jack.