(approx) 30 Minutes
Simple installation for anyone.
- How to Install Raxiom Smoked LED Side Marker (07-18 Wrangler JK) on your Jeep Wrangler
$49.99 (pair)FREE Shipping on orders over $75
This Raxiom smoked LED side marker is for those of you that have a 2007 to 2018 JK that are looking to upgrade your marker lights to an LED version. The LED is going to be lot brighter. It's also going to give you that nice, crisp, clean on or off flash and a more modern vehicle. When this is in the off position, it has a smoked, more stealthy look. So, whether you're trying to use this as an individual piece or as part of an entire exterior LED overhaul, this is gonna be a very nice option for you. This piece installs incredibly easily into a Jeep, one out of three wrenches, plugs directly in, clips directly in. Hardly any tools are even necessary for the installation, and I'm gonna show you exactly how to get this installed in just a second. So, this is gonna be very much an OEM-looking piece when you have the two side by side, and I'll give you a comparison in a second as well. So, it's gonna fit and work just like the factory piece but, again, instead of having an incandescent bulb on the inside, it has a series of LEDs behind the smoked lens. Now, even though the lens is smoked as you can see, this is going to be very bright, even brighter than the incandescent bulb in the factory turn signal, which is one of the big benefits of installing something like this. Now, there are gonna be a couple of different versions of these marker lights that are going to be smoked and are going to be LED. I think that this one coming in at right around $90 is a very fair price for what you're going to get. I don't think spending too much more than that makes a lot of sense because you're really not going to get much more. This is very high quality, very bright, and a super easy installation. Although, if you are looking for one of the more premium brands that are out there, we do have an option from them that's gonna cost just a little bit more. So, now I'm gonna show you how to get this installed. So, like I said, this is a very, very simple one-out-of-three-wrench installation. All you have to do is pop one plastic clip out. Go ahead and unplug the light. There's a small little lever on the light itself that you'll push and remove it from the inside of the fender, then you can pop the new one in and plug it in, and replace your plastic clip. So, I'm gonna show you how to do that right now. Unplug and then the fun part. You can really see the similarities and the differences between these two pieces when you have them side by side like this. So, of course, they're both gonna be plastic pieces, they're both going to be the same size, they're gonna have the same style of a backing plate and that's going to allow the new one to pop right in place of the factory one. No drilling, no cutting, no other major modifications at all. On the backside, you can see that the plugs are going to be exactly the same, so it is going to plug directly into your OEM wiring harness. The only difference that we see back here is, of course, this factory one comes out and it has an incandescent bulb in the bulb holder where the LED one, of course, doesn't come apart. That's going to be all solid state, but the LED lasting so much longer, you won't need to take this one apart and change out the bulb. So now, let's get into the installation. Now, the factory light is removed, it's just a matter of getting this new one in the spot where the factory came out of. So, again, there's a little bit of wrestling involved here, but once this goes into place, it'll clip in, then you really just have to plug it in and replace that plastic push clip. So, if you're looking for an easy to install smoked LED marker light for your JK, I would recommend this choice from Raxiom, and you can find it right here at extremeterrain.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
March 09, 2020
Quick and easy
Little wiggle into place, pull the plastic off the lenses after you slide into position to avoid scratching:Helpful (0)
February 23, 2020
Good Replacement but tab broke
I needed to replace a sidelight, so I took the opportunity to upgrade. After finishing one side, and working on the other, the locking tab broke off in my hand. This is a little disappointing as I didn’t do anything outside of typical install. It’s in place and held together by other means.Helpful (1)
February 20, 2020
Much better look than stock. I found it a bit tricky getting the new one in vs the old one out, but was still pretty simple.Helpful (1)
February 09, 2020
Love the look, Hate the installation
The only reason I didn’t give these 5 stars is the installation is a pain in the rear. It took me almost 90 min to get them in because I couldn’t get the clip at the top to release on the stock units. Once I got the old ones out, the new ones snapped right into place. The look great with the smoked LED front turn signals. Other than the problems encountered, I am very happy with them.Helpful (1)
January 30, 2020
The lights look great. A little of a pain to put in. I followed along as they say but it was a little tough getting pins back in. Love the look of these lights and they look great with the other smoked out lights. I recommend these over others-Helpful (1)
October 06, 2019
Nice and easy
Paired these with JW speaker LEDs all around, they match those nicely, they look nice overall, and the blackout look when unlit is a nice touch. Easy install but you do have to be careful to not scratch the lens - so leave the packing tape on the bulb until you get it in place, it’ll give you a little protection.Helpful (3)
October 05, 2019
These are exactly what we were looking for. It was an easy install and looks great in our JeepHelpful (2)
September 21, 2019
The smoked lights from Raxiom were an awesome upgrade for the JK. Easy to install. Package arrived on time with no damage. Will definitely order from ExtremeTerrain again. J.E.E.P. (Just empty every pocket)!Helpful (2)
August 12, 2019
These turned out amazing and a lot brighter than I thought they'd be. Install was a bit of a pain, but nothing to bad.Helpful (2)
August 12, 2019
not much room for a big hand
stock fender very stiff, was was hard to center one of the light!Helpful (2)
do these LED side markers "blink" with the turn signal engaged?
These side markers are going to function the same as the factory ones and will not blink with the turn signal.
Will these fit the factory style fender flares you sale Item# J108531-A
These would fit with OEM and OE fender flares.
Does this come with two side markers? One for each side?
Yes, these are sold in pairs, one each for the driver and passenger side.
This will have a 30-day warranty on them.
Are they SAE rated? Tx
These will not carry any DOT or SAE markings.
Yes, side marker guards can certainly be installed over top of these side markers.
The Raxiom Smoked LED Side Marker is designed to replace the OEM marker light which is approximately 2 3/8" in diameter.
These Raxiom Smoked LED Side Marker (07-17 Wrangler JK) would fit the RedRock Fender liners.
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box