Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Raxiom Axial Series LED Amber Turn Signals; Smoked (07-18 Jeep Wrangler JK)

Item J108040
Verify parts fit and get product recommendations.
Wrangler Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$24.99 (pair)

FREE Shipping on orders over $119 Market Price $28.99 You Save 14% ($4.00) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works
Install Shops are available near Ashburn - 20149

Add Local Shop Installation

Total cost of service $125.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      If you've broken a turn signal on the trail, or even just had one burnout from regular old wear, you may be looking for a new set. This Smoked LED Amber Turn Signal pair will be the most affordable way to replace those lights. This will have a moderately smoked lens that will give the front end of your '07 to '18 JK an understated or aggressive touch, and this will do a good job of matching any other LED lighting that you have on your JK right now. These are completely plug-and-play, so I'm giving this install a one out of three wrenches on the difficulty meter, and I'll show you how to bolt these in in just a minute. These will not just look a lot better than the standard yellow turn signal that Jeep has, but they will function a lot better as well. These will have eight LED bulbs in each housing, which makes for a brighter light at 2,000 lumens. And because they're LED, they will last a lot longer, usually around 50,000 hours.Being brighter, it won't really help your visibility while you're inside of the Wrangler, but they will look a lot cleaner and be a lot more noticeable to other drivers and when you hit the unlock on the key fob. The lighting is not only the upgraded component of these lights, but the housing and the lens are too. These are made of tough ABS material, which surrounds the lights to keep them protected better than the stock plastic housings did. The lenses on these are smoked, however, unlike some other options where the smoke lenses are dark black, these will have a lighter tint. They'll still have a stealthy look, but the lens will not be dark enough to jeopardize the brightness of the light.This will be the most affordable replacement option that we sell on our site at the moment at around $35. There is not much to compare this to since we don't have a huge selection for upgraded turn signals or parking lamps, but we do carry some other options from Recon. Those are a lot pricier to atound the $120, but you can expect some great quality out of those. Recon has smoked and clear lenses, while this one is moderately smoked and not completely black or clear, which gives you some flexibility while staying stealthy and keeping that bright light. If you weren't looking at dish that kind of cash out for a pair of parking lights or even stoplights that are around $40 a piece, these will definitely be the most affordable upgrade and a great addition to the front end of your Wrangler.Like I mentioned, these are gonna be a one out of three wrenches on the install, and now we'll head over to the shop and I'll show you how to put these in. So first things first, we have to get our grille off. So we can pop our hood and take off these six pop clips that are holding it in. Now you can use a flat-head screwdriver for this. Just be careful of your pin. Otherwise, you can use a trim removal tool, but they just very easily pop up. And then once those are out, you can pop the grille off. You might have to wedge your flat-head in between the clips and the radiator support to break it free. You will have to give it a little tug, but that's okay, they'll be... You can either take the turn signal light off first, or you can pop this out of the place being very careful of the stock bulb. Push this clip forward and fully remove the harness. Now you can just pop that back in and move on to the next one.So this clip is facing upwards, so we don't have to actually remove it, just have to pop our red retaining clip back and then pull the harness off the bulb. And we can fully remove our grille then.So once we have our grille out and on the table, we have to remove our stock turn signals in order to get our new ones in. So you're gonna have two tabs that are holding the housing in place. All you need is a flat-head screwdriver to pop those clips and push the turn signal out. You could even do it by hand if you wanted to, but I find it easier with a tool. And that will just pop out the front, just like that. And keep in mind, you will have a right side and a left side. So our new turn signal, this is our right, so this is gonna be over here and our left. And you won't be able to switch them up, they will be oriented to the clips. And just like that, pops out.So after the stock turn signals are taken out, we're just gonna put in the new ones just how those came out. So these have the two clips on them and you're gonna insert it from the front and these will line right up and they will just pop into place. And you'll hear them clip to when they are stable. We can move over to the right one and do the same.So now we can install our grille just as the same as it came off and we can connect our turn signals at the end. So, all you have to do is just give it a little bit of force and pop it back into place. And then we can reinstall our turn signals. Now, these are plug-and-play. They're just gonna do the same exact thing as the factory did. Going to plug those in. And you're gonna hear that little clip when it's into place. So I'd recommend that you plug these in once the grille is in the place because these aren't gonna be able to move around like the halogen stock bulb will. And you don't want to put any stress on your wiring harness. After that's plugged in, we can put in the six pop clips. Once the grille's in place, you can go ahead and close the hood.So that's my review in install on the Axial Smoked LED Turn Signals. For more videos like this, keep it right here at extremeterrain.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • LED Turn Signals
      • Replacement Lights
      • Amber Finish
      • Smoked Lens
      • Color Temperature: 2000K
      • Voltage: DC12V
      • 4 Watts
      • Super Bright
      • Black ABS Housing
      • Faster On/Off Response Time
      • Sold As A Pair, Driver and Passenger Side Included
      • Plug-and-Play Installation
      • Fits 2007-2018 Jeep Wrangler JKs

      Description

      Faster Blinking Time. When you need to replace burnt out turn signals on your 2007-2018 Jeep Wrangler JK, upgrade to a much brighter pair. Axial's LED Amber Turn Signals' stylish smoked lenses are the perfect replacement for your dull factory lights. They provide your vehicle with a faster on/off response time that is sure to catch a driver's attention when you need to make a left or right turn.

      Brighter LED Lighting. This set of round driver and passenger side LED Amber Turn Signals features high-output LEDs with DC12 volts and 4 watts of light giving off a brighter appearance. With a color temperature of 2000K, these radiant turn signals will surely improve your safety on the road.

      Tough ABS Material. Constructed out of durable material, this pair of Axial Smoked LED Amber Turn Signals are built to handle rugged trails or urban concrete. These well-crafted turn signals have housings made of high-quality, lightweight black ABS plastic for long-lasting usage.

      Easy Installation. Axial 's Smoked LED Amber Turn Signals are made to be a simple plug-and-play replacement for your stock signals. With basic hand tools, the installation will take approximately an hour to complete.

      Application. The Axial Smoked LED Amber Turn Signals are specifically designed to fit on 2007-2018 Jeep Wrangler JK models.

      Axial

      Fitment:

      Details

      Raxiom J108040

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Driver Side Front Turn Signal
      • (1) Passenger Side Front Turn Signal
      4.3

      Customer Reviews (270)

        Questions & Answers

        10 More Questions

        Will It Fit My Wrangler

        • jk Rubicon 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
        • jk Rubicon 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
        • jk Wrangler 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
        • jk Wrangler 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18

            Related Wrangler Categories