How to Install RT Off-Road Combo Beach Topper - Black Denim (97-06 Wrangler TJ, Excluding Unlimited) on your Jeep Wrangler

1. Remove the factory soft top or hard top and install the windshield header.

2. RT Off-Road Combo Beach Topper - Black Denim.

3. Start by pressing in most of the front seem into the windshield header. It will not stay. 

4. Using the supplied strap holders.

5. Secure the rear two straps loosely to apply a little tension to the front seem. This will help to hold it in place. 

6. Complete the front seem. Then use the side Velcro straps to work your way back. 

7. When using the door surrounds clip the plastic portion into the channel just like the factory soft top. 

8. The extra flap would be for an installation without door surrounds. They can just be tucked away. 

9. Secure the two straps around the center roll bar.

10. Secure the outer straps around the center roll bar.

11. Snug the rear straps and installation is complete. 

Installation Instructions Written by ExtremeTerrain Customer T. Boyer 4/10/2018.