(approx) 1 Hour
Simple installation for anyone.
- How to Install Barricade Alloy Series Aluminum Front Bumper (07-18 Wrangler JK) on your Jeep Wrangler
$599.99 (each)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 09, 2020
2020 Rubicon issues
So far I am about three hours in to this installation, but I had to stop because the D shackle mounts were not included. Also, please know that the wiring harness for the fog lights from a 2020 Rubicon must be recovered from the stock bumper To make this work. That requires pulling apart the sandwiched pieces of the stock bumper. I think I’ll be fine once I receive the D shackle mounts and I will have to find a way to conceal the wiring for the fog lights.Helpful (1)
July 19, 2019
installation took about 3 hours 1 hour was due to poor instructions and change in factory fog light installation bracket not in alignment with instructionsHelpful (2)
April 10, 2019
Bumper came well packaged. 2 day shipping was awesome. Installation was easy by myself. Great purchase Roughly 2 hour install. Most of that was removing stock bumper.Helpful (2)
February 04, 2019
Great bumper but..
I really like this bumper, but Im giving it a less than steller review because it was missing the D-Shackle mounts and the bumper cant be installed without them. After sending the first bumper back and the replacenent was also missing them I made them myself. Baricade seems to have some quality control issues. The bumper took much longer to install because I had to make the DRing MountsHelpful (6)
December 03, 2018
Good lightweight bumper
The alloy part of this bumper is so light I could lift it with one finger! I had zero fitment issues. You will need to extend the wiring for the fog lights. I just spliced in my own wires rather than spend $20. Install took about 1 1/2 hours and that's only because I was doing it by myself. 2 people would make the install go much faster. I've only had it a week and haven't taken it on trail yet.Helpful (6)
December 01, 2018
Excellent product, looks fantastic, installed it myself quick and easy, fit perfectHelpful (6)
November 14, 2018
This bumper is light weight and reliable! It looks perfect with my blacked out Sahara, waiting to put on a winch to complete the look.Helpful (7)
October 02, 2018
Lightweight and Looks Great
The bumper is very light and constructed of aluminum allow. The winch mount is steel, and probably weighs more that the bumper!Helpful (6)
September 22, 2018
Looks good but not strong
Easy install, looks good, and very light weight. I was very excited about this bumper because of it's low weight. But let it be known -- if you wheel hard and hit rocks on a regular basis -- this probably isn't the bumper for you. I've been running this bumper for about 8 months now and have wheeled with it a bunch. It just can't hold up to rock hits very well. The first hit I took on this bumper crushed the lower middle section in like butter. All-in-all, if you don't play in the rocks much and like the looks, then this is a great light-weight option.Helpful (11)
September 17, 2018
Great aftermarket front bumper
Lite weight but strong. Comes with winch plate and all nessacery hardware to install. Only took me a couple of hours.Helpful (7)
Does this bumper require vacuumed pump relocation on 2017 JK Willys 2 door?
No, the Barricade Alloy Series Aluminum Front Bumper does not require vacuum pump relocation.
What is the total weight of the bumper with winch plate after installation? I see 54 lbs. in the features section and 74 lbs. in answers.
The total weight of this product is 74 lbs.
What is the total weight of just the bumper? 54 lbs or 74 lbs? I see 2 numbers. If it's 74 lbs, why does it weigh almost as much as the same bumper in steel, when aluminum is 2.5 less dense?
This will weigh in at 54lbs.
What weight winch will this support? 8,000/10,000/12,000?
The Barricade Alloy Series Aluminum Front Bumper will support most 10,000 Lb winches, and a good number of 12,000lb winches, however with 12,000lb winches, the overall design and footprint will be very important for proper fitment. We typically recommend 10,000lb winches with this bumper.
Will the Smittybilt Gen2 X2O 12,000 lb. Winch fit the Bumper
Yes, the Barricade Alloy Series Aluminum Front Bumper will accept the Smittybilt Gen2 X2O 12,000 lb. Winch. We typically recommend 10,000lb winches with this bumper.
Thank you for your question! The Barricade Alloy Series Aluminum Front Bumper will attach to the frame plates after taking off the stock plastic bumper cover and crash bar. Most Barricade bumpers have a pre-welded stud in the plate and the rest of the holes on the plate will include bolts.
The Barricade Alloy Series Aluminum Front Bumper does not require additional accessories for install, but it does look great with a winch and some lights on top of the bull bar!
Yes, the d-ring points on the Barricade Alloy Series Aluminum Front Bumper are intended for recovery points.
Unfortunately the Barricade Alloy Series Aluminum Front Bumper is not tow rated. We highly recommend against using this bumper in this or any similar manner.
The light tabs on this Barricade Alloy Series Aluminum Front Bumper are meant for single off road lights, it does not have a measurement to fit a specific light bar. You may be able to install a small light bar if you can find one that fits within the tabs though!
These are 10mm thick and will hold 3/4" D-Rings. They are very standard mounts.
You would not be able to lift the jeep up with the D-ring mounts.
This bumper will require an additional harness, but the OEM fog lights will work.
This does not include a front license plate mount or dedicated mounting location.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box