(approx) 30 Minutes
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 28, 2020
great look , simple and efficient for great cost easy installationHelpful (0)
January 22, 2020
I can see again!
Great product very tight fit but drastically increases visibility. Highly recommend.Helpful (0)
January 13, 2020
Let there be light
economical, easy to install LED replacement for stock headlights, huge improvementHelpful (1)
January 02, 2020
Ordered these for our sons 2003 Rubicon. They installed the lights in about 2 hours. It took a little longer because the screws are very small and they kept dropping them. Make sure you have a strong magnetic screwdriver before you start. They did not need to remove the front grill because of the year. The tinted gray lights look great on our sons black Jeep. He drove home in the dark for 4 hours and could finally see the road. Love the lights! Would highly recommend them.Helpful (3)
December 08, 2019
Axial Led headlights
Worked mostly like the video and instructions showed. Just a hint that the plastic pieces that hold the grill on are cheap and you will probably break one or two. Make sure you have all connections put back together securely. Really pleased with the looks and performance.Helpful (1)
November 20, 2019
Great lights for the price you wont find better
Easy to insall, fit good in the stock light bezel on my 2008 JK. They are very bright and clear with large hotspots. No flicker or bounce like so many cheap lights.Helpful (1)
November 10, 2019
Well worth the money, easy to install and look really goodHelpful (1)
November 07, 2019
let there be light
very bright the right light had to take some of the light bucket off with a grinder to get a fit but other than that no problemHelpful (1)
November 04, 2019
These light are not bright at all, and they are slightly too big for the bezel. There was still a flicker from low to high beam even with the anti flicker installed. Overall, disappointed in this.Helpful (2)
October 30, 2019
2015 JK Just Move Along
If you have a 2015 JK just move along and find another headlight. I went to go install the headlights on the passenger side first and was unable to get the alignment tabs to line up. They are just off enough that they dont snap or slid into place. I am returning them back and looking for another set.Helpful (3)
Are these street legal, DOT approved??
The Axial LED Headlights will carry DOT/SAE approval, with this being stamped on the lens of the lamps. We recommend consulting with local authorities to verify legality in your area, as DOT and SAE are federal and some states and municipalities have laws that will supersede this.
Are these going to flicker and flutter? If installed in non led equipped vehicle ?
These headlights will utilize an anti-flicker box for both, so you will be just fine.
Does this include 2 headlights or is that price for each?
The Axial LED Headlights are sold as a pair.
It is hard to tell in the pictures, is the reflector in the light chrome? It almost appears to be black in the pictures.
The housing will be black, not a light chrome.
Where are these made? And are these plug and play for all Wrangler JK models?
These Axial LED Headlights are manufactured in China and are designed to fit all TJ and JK models.
The Axial LED Headlights do not use any projector lenses or cutoff plates, so the beam pattern will be similar to stock, though significantly brighter.
These Axial LED Headlights have a black aluminum housing, so they will not be completely black, but they will be darker than if they were chrome.
Extreme Terrain offers a 30 day warranty from date of delivery of these lights from Axial. Axial does not offer a direct warranty on this product and will need to be handled through ourselves at Extremeterrain.com.
The lights are designed to be compliant with US vehicles and laws. There can be some legality and wiring issues when these are being used outside if the US.
These lights have an H4 connection, and the adapter harness will not need to be used if your Jeep already has the H4 connection. You will need to use the anti-flicker modules though, which would just plug inline with those H4 connectors.
Both headlights will offer high and low beams. These will be a non projector style lamp, whereas the daymakers will be a projector style light.
As we are in the US, we do not carry many parts, or have information on parts for vehicles in countries where vehicles are RHD. We are not aware of any headlights designed specifically for a RHD vehicle.
Headlight buckets can be sourced through your local Jeep dealer. These are necessary if your Jeep had OEM LED headlights. Those equipped with OEM Halogen headlights will not need to change headlight buckets.
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box