Custom Tie Rod and Drag Link Required (sold separately)
Compatible with 15" Wheels w/ 3.5" or Less Backspacing
Fits 1997-2006 Jeep Wrangler TJ Models
4+ Inches of Lift. The TeraFlex Dana 30 High Steer Knuckle replaces the outer knuckle on the passenger side with a new high steer knuckle. The knuckle features tapered inserts that make customizing easy by allowing the drag link (knuckle end) to enter from the top or the bottom of the steering arm. The tapered sleeves are available for the drag link to fit stock taper rod ends, or the large taper rod ends (standard Dana 60).
Raise Position. This new one-piece High Steer Knuckle raises the steering arm position to correct the steering linkage geometry on TJ Wranglers with 4 or more inches of lift. In addition, this knuckle kit is designed to accommodate 15" wheels that have 3.5" or less backspacing.
Application. This Teraflex High Steer Knuckle Kit is designed to fit 1997-2006 Jeep Wrangler TJ models equipped with a 4+ inch lift. Custom tie rod and drag link (available separately from TeraFlex) are required.
Application Note: The stock OEM ends will not work in place of TeraFlex's stock-taper one ton end.
I have used Extreme Terrain for 5 items so far. Everything has went smoothly and all is advertised. I really like the available videos for many of the items, numerous photo's, great instructions and so forth. I would highly suggest giving them a try. Zero complaints.
Jim H, 2010 Jeep Wrangler JKWeb Development My dad would always take me trail riding in the Pine Barrens as a kid when I lived in South Jersey, so I’ve always been into four wheel drive trucks and Jeeps. When the time came for me to get a vehicle, I picked up an old Cherokee. I still have that old Jeep strictly for offroading, but after a few...