We're sorry. We couldn't save this product at this time.
Video Review & Installation
I'm Ryan from ExtremeTerrain.com, and this is my review of the Smittybilt SRC Side Armor, fitting all 2007 to 2016 JKs. This armor is available for both two-door and four-door Wranglers. This is for anyone looking to add some light side armor protection to their Jeep, and they're a really useful step to help them get into or out of their stock or lifted height Wrangler.Now, this armor is a little bit pricey, in my opinion, for what you get. But it does give you that light protection that we talked about, and it is a pretty good step. This side armor is built from inch and three-quarter diameter, .12-inch wall thickness steel tubing, and it's covered in this textured black powder-coated finish that will help to resist corrosion and rust down the line. It also does a good job at matching a lot of other Jeep accessories and the factory black plastic accents on your Jeep. As you can see here, it has two nice, large stepping surfaces, each that have a couple of holes drilled in them, which makes them a little bit more nonslip and adds a little bit of detail to the step.Now, these are pretty well-built. The welds look solid, and they're built of a heavy material. However, it's the way that they mount that makes me think they're not quite as strong as other armor on the market. These only mount in two locations, instead of three, on the four-door that we're looking at here, and these mount using the body bushing bolts, instead of the larger main body bolts. There's a couple of reasons that this seems to be a little bit weaker than some of the other armor on the market.These'll install pretty easily onto the Jeep because they're designed to be completely bolt-on and they actually use all of your factory hardware. Now, they do have a little bit of weight to them, and especially the four-doors that are a little bit larger mean that you'll probably wanna have an extra set of hands around or at least a tall set of jack stands to hold up the weight while you get everything lined up.The installation process is pretty straightforward. You'll remove two bolts from each of the body mounts on the front and the rear of the Jeep, put the step in place, and replace the bolts. That's all there is to it. You won't need any specialty tools at all, just a regular socket set, and the whole process shouldn't take you more than an hour.Like I said before, these are a little bit pricey for what you get, in my opinion. I would like to see these mount a little bit more securely because these are designed to be armor and give you a little bit more ground clearance. Again, in my opinion, these act more like a step than armor, even though they're called side armor and they're priced like side armor. For the same amount of money as this side armor, you could get something that is gonna hold up a little bit better, even though it might not work quite as well as a step.So if you're looking for side armor of this design and you have the budget for it, this is a really well-built piece and the finish on it is really solid. However, if you're looking to do really hardcore off-roading, I would probably take the money that you would've put into these and put them into something that is a little bit more armor-like in the way that it mounts and the ground clearance that it provides.So that's my review of the Smittybilt SRC Side Armor, fitting all 2007 to 2016 JKs that you can find right here, at ExtremeTerrain.com.
1.75 Inch Thick Tubular Steel with 0.12 Inch Thick Walls
Black Textured Powder Coat
Protects Sides and Undercarriage
5 Year Limited Warranty
Bolt-On Installation with No Drilling Required
Fits 2007-2018 JK Wrangler 4-Door Models
Construction. Designed as an extra tough one-piece construction, Smittybilt's side armor is fabricated from 1.75 inch steel tubing with 0.12 inch walls and a dual girder design. The textured black powder coat finish defeats rust and gives your feet purchase when you use the armor as a step into or out of your Wrangler. The design gives your Jeep a brutally competent look.
Protection. Mounting this wheel-to-wheel side armor deflects all manner of hazards from your Wrangler's sides and undercarriage, shielding against the biggest rocks and branches a remote trail can throw at you. It also offers a solid step.
Application. These side armor pieces attach to your 2007-2018 JK Wrangler, 4-door models only, with a simple bolt-on attachment.
I have used Extreme Terrain for 5 items so far. Everything has went smoothly and all is advertised. I really like the available videos for many of the items, numerous photo's, great instructions and so forth. I would highly suggest giving them a try. Zero complaints.
Jim H, 2010 Jeep Wrangler JKWeb Development My dad would always take me trail riding in the Pine Barrens as a kid when I lived in South Jersey, so I’ve always been into four wheel drive trucks and Jeeps. When the time came for me to get a vehicle, I picked up an old Cherokee. I still have that old Jeep strictly for offroading, but after a few...