Simple installation for anyone.
$9.99FREE Shipping on orders over $75
Key Features. Never be without your flashlight on the trail with the Rugged Ridge Flashlight Mounting Brackets. The brackets can accomdate flashlights that are 1.5 inches in diameter, holding them securely in place and releasing only when you pull the flashlight out. If you'd rather, a flexible Sport Bar Holder is also included, opening up additional possibilities for putting your flashlight somewhere handy.
Construction. The Brackets are made of durable steel, while the Sport Bar Holder is made of heavy-duty nylon with thick velcro attachments.
Installation. Installing the Brackets does involve some minor drilling and a carbide drill bit, but the mounting screws aren't included. The Sport Bar Holder can be installed without any tools since it only involves adjusting the velcro straps by hand.
Application. The Rugged Ridge Flashlight Mounting Brackets can be used on all 1987-2020 Jeep Wranglers
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Simple installation for anyone.
November 01, 2019
Simple, good looking and affordable. Easy install.Helpful (0)
October 26, 2019
Sturdy Flashlight Clips
These clips hold a standard D-Cell Maglight nicely. No movement while driving and the flashlight is always where I can get at it quickly. I made a simply bracket out of some aluminum plate to mount them off my driver side seat seat rail. Doesn't interfere with any of the seat controls or door functioning.Helpful (0)
October 23, 2019
EZ install, only 1 hole to drill. Keeps flashlight right where it should be.Helpful (0)
October 05, 2019
seems to be made very well nice tight fit for a 3 cell led mag lightHelpful (0)
August 29, 2019
This item arrived when promised and works as expectedHelpful (0)
July 29, 2019
Great mag light holder
Simple bolt in over either side front seat. Holds light very securely even over severe terrain.Helpful (0)
June 20, 2019
Exactly what I wanted...
Drilled 3 small holes in the seat frame and it works perfectly to hold my flashlight out of the way but available if i need it. Took me about 15 minutes or so to get it installed. I've bought several Rugged Ridge products and they win again!Helpful (0)
January 03, 2019
Product is as described. I did not need to drill anything. One bolt in each clamp using existing holes in frame is plenty sturdy. The 3 D cell mag light is the perfect fit.Helpful (5)
December 22, 2018
Great product, holds my flashlight nice and tight so it's always in its place when I need it.Helpful (6)
November 15, 2018
Nice and easy.
Easy to install and holds flashlight firmly. All hardware included and you can mount anywhere you choose.Helpful (7)
October 22, 2018
Perfect storage to keep your flash easy to find and accessible.Good use of otherwise wasted space and it's right next to the gun safe under the seat.It will not interfere with the Tuffy Concealed Carry.Use the 2 holes left from removing the wiring plate.1 screw in each clip works for me.Helpful (7)
May 23, 2018
Rugged Ridge Flashlight Holder
This equipment is simple, easy to install, and effective at securing your flashlight in place. I have a 2015 JKU and the drivers seat base had 3 of the 4 holes already there, only had to drill 1 new hole. I would highly recommend.Helpful (8)
April 16, 2018
I like the fact that the mount is metal. I bought the largest Mag Light for sale for protection when I don't have my 10mm.Helpful (9)
October 31, 2017
Nice product. Mine did not come with the advertised sports bar holder, however, it did come with the mounting screws. Requires drilling one additional hole into the seat frame for one of the brackets. Holds flashlight firmly.Helpful (9)
October 09, 2017
Fits perfectly. Make from metal not cheap plastic.Helpful (8)
July 02, 2017
good but ambiguous as to the most successful product locationHelpful (8)
February 22, 2017
This mount is very sturdy and no rattles. You mount it wherever your imagination wants. Extremely versatile mounting options.Helpful (8)
September 07, 2016
Received them quick and they are a high quaility product. You cant go wrong for $10.Helpful (9)
May 08, 2013
Good utility quality.
If you keep a flashlight in your rig and need to have it handy these simple clamps give you a flexible means to keep it in reach. Came with 2 clamps so you can mount two short mag lites or one long one in a number of places around the rig. The clamps have a flat face to mount so if you wan to put them on a roll bar you'll need to make straps but they'll bolt to the dash support frame, tub, floor, or windshield frame with ease. If you need a way to mount your front license plate you can clip them to the roller fair leads of a winch and bolt the license plate to the "mounting" face of the clamps themselves! Versatile product.Helpful (10)