Customer Reviews (14) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Less than 1 Hour

• Protection 4.928571 4.9
• Fit 5 5
• Appearance 4.928571 4.9
• Bang For Your Buck 4.642857 4.6

• 5/5

  Installation Time: Less than 1 Hour

  December 14, 2018

  Essential for every JK

  Great product, beefy and straightforward install. Customer pics helped, as instructions are pretty bad. 30 mins, tops. I used 5/8" socket, couple of extensions, a u-joint, and the included hex key. 5/8" open/box end wrench. Every JK should have this- your evap can is super exposed, and is plastic. Buy this product for your JK. Then, get an oil pan skid.

  ScottC

  Year: 2008Submodel: Wrangler

  Helpful (4) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  November 07, 2018

  Happy so far!

  I purchased this for my son's 2011 JKU, we had it installed in about 30 minutes. Good way to teach a 17 year old how to wrench. Most of the time was trying to line up the various bolt holes. Instructions were a bit confusing and pictures were too small to see with my old eyes. YouTube to the rescue. Well built and sturdy, definitely think it will work for what we needed.

  jshorecpa

  Year: 2011Submodel: Wrangler

  Helpful (5) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  September 27, 2018

  Solid Built

  Got this in and installed very easy. I was surprised at how solid built this was and how easy it was to install. It took me 30 mins from start to finish to install. I am a gear head and have worked in the mechanic automotive field my entire life so it might take someone that is not as mechanically inclined a bit longer but I believe anyone could install this. I would highly recommend this over the more expensive ones being it is so solid built.

  DaleS

  Year: 2008Submodel: Wrangler

  Helpful (5) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  July 31, 2018

  Great skid plate

  Install was quick and easy. Tip: don’t take bolts holding existing canister in place, loosen front and back. Take front one out the slide the new rear bracket over canister from front to back then install new front bracket leaving bolts loose, them remove rear bolt and install new rear bracket. Then align everything and tighten down all bolts. This is for 2007-2011 JK or JKU.

  DouglasR

  Year: 2008Submodel: Wrangler

  Helpful (5) Thanks for your input!

  • Protection 4

    4

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4
• 5/5

  June 16, 2018

  Easy to install

  The instructions tell you you need a friend to help install but if you don't take the back bolts all of the way out you can slide the plate on without dropping the evaporator down. I like the looks and it should give the evaporator the protection it needs this summer/fall when we go wheeling. After installing and putting everything away it took a little over 1 hour. I didn't jack the jeep up but just crawled around on the driveway.

  PhilF

  Year: 2008Submodel: Wrangler

  Helpful (5) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  May 09, 2018

  Thick skid.

  I'm not sure that you need this thick and heavy duty of a skid for an evap, but you certainly are not going to ever damage it. Went in easy. Extends well beyond the evap and connecting lines.

  Carol

  Year: 2007Submodel: Wrangler

  Helpful (5) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  March 17, 2018

  Beefy product!

  I saw the evap canister looking vulnerable and went shopping for protection. This RR skid plate was the ticket. It arrived quickly and was found to be super solid for such a small skid plate. Installation was pretty simple and fitment was super. No more worries about the evap!

  BradC

  Year: 2007Submodel: Rubicon

  Helpful (6) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  January 28, 2018

  I would recommend this product to others.

  Fit real good on my 2010 Sahara looks like it will protect my Evaporator very well and very easy to install.

  RodB

  Year: 2010Submodel: Wrangler

  Helpful (6) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  November 16, 2016

  Real protection

  Nice hard steel construction. Beefy!! Fits well with my high clearance cat back exhaust.

  TNTeamRed

  Year: 2007Submodel: Wrangler

  Helpful (7) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  November 15, 2016

  Evaporator Skid Plate

  Glad to find this skid plate for a good price...... I am sure it will add great protection. Installed very easily... Looks good too.... Happy Trails

  bellboy01

  Year: 2010Submodel: Wrangler Unlimited

  Helpful (5) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  November 18, 2015

  Great protection

  The instructions were a little unclear, really bad images but it's pretty easy to figure out without instructions. It is well finished and looks like it would take a beating. Great value for money.

  Chrissafari

  Year: 2010San Diego, CA, USA

  Helpful (6) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4
• 4/5

  Installation Time: Less than 1 Hour

  April 25, 2013

  Evap Protector was easy install

  Seems like a rugged set up. Install was pretty easy. Looks like it can take some abuse.

  Crackertoo

  Year: 2009Michigan, USA

  Helpful (6) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 4

    4

  • Bang for your Buck 3

    3
• 5/5

  Installation Time: Less than 1 Hour

  April 11, 2013

  Easy install and low cost

  Install took probably about 20 minutes top without help. Don't even need the install instructions lol. Good quality skid and will do the job I need it too. The low cost compared to others was a big buying point for me.

  Cody87

  Year: 2011Tucson, az

  Helpful (8) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  March 17, 2013

  Heavy Duty

  Looked so good out of the box that i wanted to mount it where people could see it. High Gloss black heavy duty steel. Easy install even by myself. Fits good Will be great protection for my Evaporator.

  oldguy

  Year: 2010Williamsburg, VA, USA

  Helpful (6) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4