Simple installation for anyone.
$32.99FREE Shipping on orders over $75
Features, Description, Reviews, Q&A, Specs & Installation
Construction. If you want a CB radio in your TJ consider this Rugged Ridge black CB radio dash mount. This kit gives a easy to reach location on the dash for the radio but does not interfere with your vision. The kit includes a microphone mounting plate so that, while driving, the microphone will not obstruct your ability to keep two hands on the wheel.
Accessories & More. These mounting plates install quickly and easily with out having to drill into your TJ; simply replace two dash screws with the longer screws provided and you're done. You can now mount your CB radio.
Application. The mounts can be installed onto 1997-2006 TJ Wrangler models but no aftermarket roll cage can be equipped as it prevents these mounts from being installed.
Fitment: 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
July 12, 2019
This allows me to use dead space for radio, dash-cam, etc. Space is limited in the Wrangler for such things. Installation cannot be simpler. I recommend it.Helpful (1)
January 25, 2019
Great cb mount for mini cb radio
This bracket works great with the small cb radios. It fit perfectly and only requires a screw driver to install. It helps to mount radio to bracket loosely and then hold it up to screw holes and decide where you want the radio at in relation to windshield. There was plenty of room and once you have the best position for you radio tighten the bracket from your radio to the mount and install using the screws. The microphone clip from the radio is attached to the included small bracket and fits on the right side of the steering wheel using the supplied replacement screw. This screw is slightly longer than the original screw and takes some effort to install as it is also a little bigger in diameter. It is going into a metal bracket bar behind the dash cover under the steering wheel so you can't see the hole it goes into. It took some patience and a few tries to get it to tighten all the way but once done it looks and works great. The bracket looks great and the cb radio looks like it belongs there.Helpful (5)
November 28, 2018
It is what it is
What you see is what you get. The install is easy and it fits fine in my 2000 TJ. No reason for me to take pics, the picture on the ExtremeTerrain website does a fine job.Helpful (4)
October 14, 2018
Cb radio Dash mount for tj
Doesn't fit the cobra 25ltd classic right? U guys need to put that in the inf now I have to buy in other radio o not use the bracketHelpful (5)
September 22, 2018
Narrow radio mount
This is a good product. This issue is there is little space and the radio needs to be small. I mounted a Rugged Radio on it but used a 2" spacer to raise the radio . The spaced was a good place to mount my XM radio receiver.Helpful (6)
August 31, 2018
Awesome CB Mount!
Goes in without a hitch. Super easy install and works great.Helpful (4)
April 05, 2018
Great fit for my 03 TJ
I wanted to add a small cb radio to my jeep for an upcoming trip. Having no real experience with them, I wanted to make things as simple as possible so I ordered the dash mount just to make installation easier. This mount looks great, it's solid, and it's easy to install. I definitely recommend.Helpful (7)
February 12, 2018
Easy Installation. Fits like a glove. Recommended if product is desired.Helpful (6)
September 22, 2017
Rugged Ridge Cd Mount
Very good quality and fit, easy to install. Took around 5 minutes. Will tell my friends to get one if they are installing a CBHelpful (6)
August 26, 2017
Sturdy Mount, Easy Install!
This mount installs in just a few minutes. My CB radio does not vibrate one bit. It stays put. Mount is seems to fit my 2005 TJ perfectly. You will want to chose a small CB radio like the Uniden 510 or 520 due to the mounting location. I used the Uniden 520 with a right angle connector and also chose to install a PA speaker. All wires fit snugly behind the radio with no pinched wires.Helpful (6)
What is the exact measurement across the radio mounting surface? I would like to use it for a Rugged Radios radio. I do not want to modify the gauge cluster.
The measurements for this part are, Height- 15.75"Width- 6.13"Length-5.50"
Will this mount fit a full sized CB radio. The pictures look like they show the compact size of a CB radio.
The Rugged Ridge CB Radio Dash Mount (97-06 Wrangler TJ) mounts best with a compact CB radio. Full size CB radios may require modification to fit over the Gauge Cluster trim properly.
Hello. Sent in a question for the wrong cb mount. I like this mount and would like to pair it with a cb of this dimension. 6.69" X 5.91" X 2.05" Can you verify if the cb will fit this mount?
I know this will cover the speaker, but can this be used on a 2018 wrangler jk ?
At this time, Extreme Terrain cannot confirm fitment on a 2018 Jeep Wrangler JK
Simple installation for anyone.