(approx) 15 Minutes
Simple installation for anyone.
$199.99 (kit)FREE Shipping
Adding a bunch of accessories and off-road lighting to your Jeep is great, however, the wiring can get very messy. Not to mention when adding all of those wires, you run the risk of blowing fuses and drawing extra energy from your battery with everything connected to it. This Raxiom Bluetooth Light Switch & Accessory Controller will solve all of those problems and allow you to easily control all of your accessories. This will consolidate all of your wiring to one controller that will act as a relay and they will be completely controllable with a remote or Bluetooth.Installing this will involve some simple wiring so I'm giving it a one out of three wrenches on the difficulty meter and we'll show you how to do that in just a minute. This unit consists of the actual control unit that you can universally mount and has the main wires in the back to connect directly to your battery and then on the other side, it has four waterproof connectors that will accept the provided wiring harnesses that you'll wire into your accessories. Each connector is individually run through this controller which will act as a relay to your battery. Within each connecting unit, you'll find fuses that will accept a 12 to 24-volt input and output the same amount. There are two 10 amp fuses and two 30 amp fuses to protect your wiring and to prevent having multiple relays for each of the wiring harnesses. What I really like about this is that it has a separate remote control to control all of the operation to your accessories so no switch or any switch pods are needed. There's even an Android and an iOS compatible app where you can control everything from and you can even program the controller for security which is also pretty neat.This is actually the only option that we have for an accessory controller and at the moment, it sits right at around the $200 mark. There are some other controllers that I have seen out on the market that are a bit cheaper than this, however, they're usually pretty basic. On the other side of that, there are controllers out there with features that this has, for double the price. I personally think that $200 is not a bad price when you're consolidating all of your wiring to make your accessories effortlessly accessible. From my personal experience with accessory lighting, this will pay itself off in the long run. I personally think that $200 is not a bad price to consolidate all of your wiring, making your accessories effortlessly accessible. From my personal experience with accessory lighting, this will pay itself off in the long run.Install will be a one out of three wrenches on the difficulty meter and like I said, this will just involve some basic wiring. This is universally mountable, like I mentioned, so you just have to find a good place to mount the control box near the battery. There are the main wires for the control box that you'll have to attach to the battery and then the other four wiring harnesses that you'll have to attach to your accessories.Now depending on what you're attaching to your controller, you want to pick the best use that fits with your accessory so you can best attach it to the correct wiring harness. After that, you can open up the app or use the controller to access your accessories. So if you're looking for a very easy and accessible way to clean up the wiring underneath your Wrangler's hood, Raxiom has you covered. I'm Meredith with XT and for everything Wrangler, keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
March 11, 2020
This thing is not $1.00. Connectors are no good. The controller sticks all the time and burns threw batteries. Would not recommend to anyone. WeHelpful (0)
March 03, 2020
This is really easy to install. I have had no issue’s with since it was installed. Great buy!!!Helpful (0)
February 25, 2020
No hassel wiring
Great product the the function from the bluetooth of your phone isn't very good. Rarely works.Helpful (1)
February 20, 2020
Your lights or accessories will turn on by itself!!!! Theres no way to know if your lights are on or off!!!! ***unless someone walks up to u and tells u that your lightbar is on!!!!Helpful (2)
February 13, 2020
My only issues are mounting location and the wiring connectors/plugs provided are terrible if you know how to remedy these two situations it’s goldHelpful (1)
February 08, 2020
Great concept, horrible execution! Thing randomly turns on by itself in the middle of the night draining my battery. DO NOT PURCHASE!Helpful (2)
January 29, 2020
Randomly turns on
Like most people have stated about this product I too have experienced the ghost turn ons throughout a day. The only positive thing I have to say is that the return process was quick and easy. Do not recommend buyingHelpful (6)
January 26, 2020
So far so good
I love this setup because you don’t have to run any wires inside the cab and you don’t have to find a set of switches and mount them so that they look good!Helpful (1)
January 07, 2020
So far so good
Installation was a breeze and no problems at all. Have not had any of the usual light turn on’s at all.Helpful (2)
January 06, 2020
Raxiom light switch controller
Definitely would buy another one worth every penny and then some. Really easy to install and looks niceHelpful (2)
Ive wired this module in for constant power, the problem I'm having is the control box is turning the lights on by itself overnight and sometimes while driving. Why would this be? I've got the module directly to the battery, put new batteries in the wireless remote, took the remote inside over night. It still keeps happening. Faulty module perhaps?
We do apologize you are having this issue with yourRaxiom Bluetooth Light Switch & Accessory Controller. Please contact our customer service department so that we may directly assist you with this issue. Our contact information can be found here: https://www.extremeterrain.com/contact.html.
Do you make a bracket to fit the unit under the hood of a JL Wrangler?
At this time we do not offer a bracket to mount this under the hood of the JL.
Are Trigger Controller accessories (wire connectors, mounting brackets) compatible with this system?
We have not tested this with any of the Trigger Controller accessories.
Does this controller only work with Raxiom Lights.
No, the Raxiom Bluetooth Light Switch & Accessory Controller will work with any accessory or light. It may require some wiring, however, depending on the accessory or light.
On the remote, can you change out the switches with different rocker switches?
Unfortunately, Raxiom does not make different rocker switches for this kit and other brands would not fit properly with this.
This Bluetooth kit is able to be used with the ARB twin compressor.
This is only meant to work with 4 lights and we would not recommend adding more than that to this.
The range can not be increased and the range is about 10 meters with this unit.
We do apologize, but we do not offer the components to this kit separately.
I am sorry to hear that! Please contact our Customer Service Department for assistance.
Below is a link listed for an installation guide on the Raxiom Bluetooth Light Switch & Accessory Controller. https://lib.extremeterrain.com/files/contentgenerator/raxiom-wireless-accessory-controller-8717-yj-tj-jk-cust-install-J107752.html/J107752-cust(2).pdf
There is not a JL mounting plate at this time.
At this time we do not offer the end plugs separately for theRaxiom Bluetooth Light Switch & Accessory Controller.
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box