Talk to a Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

How to Install Omix-ADA Park/Signal Lamp for Left or Right (97-06 Wrangler TJ) on your Jeep Wrangler

Installation Time

30 minutes

Tools Required
  • T10 Star Bit
Extreme Terrain
Shop Parts in this Guide

1. Before, the lights where fogged and showed slight cracks. 


2. Remove 2 factory T10 star screws. 


3. Pull the original Turn Signal Parking Lamp Assembly out of the fender. 


4. While grabbing the Turn Signal Parking Lamp Assembly with one hand and the light socket with another rotate counter clock wise, 1 half turn.


5. While grabbing the new Omix-ADA Turn Signal Parking Lamp Assembly with one hand and the light socket with another rotate clock wise, 1 half turn.


6. When reinstalling the new Omix-ADA Turn Signal Parking Lamp Assembly line up the pins located on the OmixADA Turn Signal Parking Lamp Assembly with the cut outs in the fender. 


7. Reinstall the 2 factory T10 star screws, installation complete. 


Installation Instructions Written by ExtremeTerrain Customer T. Boyer 10/19/2017.