Free Shipping on Orders Over $75. Details

Talk to an Enthusiast
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P

How to Install BESTOP DUSTER DECK COVER, BLACK on 07-17 WRANGLER JK 2 DOOR

Installation Time

30 minutes

Tools Required
  • No Tools Required
Extreme Terrain
Shop Parts in this Guide

1. Start by lowering your rear seat flat. 


2. Thread the provided strap through the top anchor point in the cargo area, leading the strap under the cargo cover out through the other anchor point.



3. Loop both ends of the strap along the child restraint brackets on the bottom portion of the folded rear seat. Pull tightly to keep the rear seat down. 


4. If you have a Bestop Windjammer, attach the dust cover using the zipper.


5. Attach the factory tailgate bar used in the factory soft top rear window. 


6. Using the pulling fabric pulling tabs, pull and secure the lips of the sides into the factory channels. 



7. Repeat the same pulling motion for the rear tabs and secure the tailgate bar into position.


8. Fasten the Velcro boot straps tightly around the base of the roll bars on both sides. 


9. Installing the dust cover during a hot sunny day will help aid in the stretching of the material into position.  


Before

After

nstallation Instructions Written by ExtremeTerrain Customer Louis Orellana 06/21/2016