(approx) 2 Hours
Simple installation for anyone.
$105.99 (pair)FREE Shipping
Open Box from $53.00
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Hey, guys. So, today I am here with the Barricade Textured Black Mirror Relocation Kit, fitting all 2007 to 2018 JK Wranglers. So, taking the doors off your Jeep is one of the best features that it has. However, when doing so, you are gonna be removing your mirrors which is removing a lot of your visibility. Now, a great solution to that is relocating your factory mirror to the A-pillar, and this kit by Barricade is going to do just that and be a great option to take a look into. So, this kit will include the mirror relocation bracket itself for your factory mirror and it's also going to include a filler plate. Now, those are going to be very durable, made of a steel construction, able to take some abuse, especially if you guys are taking your Jeep out on the trail and it's going to be covered in a black textured powder coat finish, which will protect the steel underneath but also give you an aggressive look in the meantime.Now, they're also going to come up with a gasket to make sure that there's no metal-on-metal contact, keeping your Jeep as clean as possible. Now, what I really like about this is the fact that this is going to be a no-fuss and no-hassle design. Once you take your doors off, you really don't have to worry about your mirror at all. Perfect for you guys out there that are taking your doors off very frequently and don't want to think at all about your mirrors. Although that being said, this kit is going to cost you roughly $100 and, in my personal opinion, I think that's set at a very good price point for what this comes with. In comparison to other A-pillar relocation brackets, this will come with a little bit more, considering that the passenger's side bracket is adjustable. So, once you're moving the mirror forward onto that A-pillar, you are losing some visibility, especially on the passenger's side and considering that this is adjustable, this will gain some back.Now, in comparison to some other choices or other solutions for trail mirrors on the page, this is, again, going to be your most hassle-free solution. Other options for mirrors will usually include quick-release mirrors or even hinge mounted mirrors that you'll have to take off and reattach whenever you want to use your door or use the trail mirror. Again, this is perfect for somebody who's frequently taking off their doors and doesn't wanna think about their mirrors at all, while still getting a quality construction.So, install is going to be a one out of three wrenches on the difficulty meter. This is very easy to install with a couple of basic hand tools. So, speaking of that install, let's jump into that now.The tools that I used for my install were a 3/8-inch drive ratchet, a 13-millimeter deep socket, a 3-inch extension, a 5-millimeter Allen socket, a T40 Torx socket, and an impact wrench.So, our first step for this install is to remove the top of our mirror from the base here. So, I'm going to use a T40 Torx socket to remove the bolt that's holding the two together. So, after that bolt is removed, what we can do is just pop our mirror off of base and then we can remove the actual base here. So, now we can remove the two bolts that are on the inside of our door here holding on the base of our mirror. I'm gonna use that same T40 Torx socket to remove those. Before we reattach our mirror, what we're gonna do is attach our filler plate. This is going to take up the empty space that's in our door after removing our mirror. Now, we're gonna reuse our factory hardware, so again, you'll need that T40 Torx socket. So, you're also gonna have a gasket.You wanna make sure that that is on there before you go ahead and attach your filler plate. And then we can put that through, make sure that that's flush with our door. That should hang out there for a second. Then we can line it up and attach our hardware. What we can do now while holding her filler plate is just tighten these up with that T40Torx socket. Now, we can move to our mirror bracket.Our next step is to remove the two lower bolts on our A-pillar. Again, we'll be using that T40 Torx socket. Next, we can grab our passenger's side bracket. This is gonna be the adjustable one. The driver's side is non-adjustable and you're also going to want to have your gasket there. And we can take those factory bolts that we just removed and mount this up in its place. After those are threaded in, we can tighten up the top one with the same T40 Torx. So, in order to access this lower bolt, what we need to do is unthread the bolt that's holding on the secondary piece of our bracket here. Then you slide this out. Then we'll be able to access that bottom bolt. Then we can tighten up that lower bolt. I'm using a 3-inch extension. And then we can reattach our secondary bracket.So, you're gonna have three holes here allowing you to adjust your mirror to wherever you want it to sit for the best visibility. This is just because, since the mirror is moved forward to the A-pillar, you do lose some visibility. So, moving it outward will gain you back some of that visibility. So, I'm just gonna put on and button that bolt. We have a flat washer, lock washer, and a nut. Then, before we attach our mirror, we can go ahead and tighten that down. So, now we can tighten down that bolt with a 13-millimeter socket and a 5-millimeter Allen socket. What we can do now is take our mirror and our factory bolt and attach it to our relocation bracket. We can tighten that up with our T40 Torx. Then you can repeat that process on the other side and you'll be all set to go.That's gonna wrap it up for my review and install. Make sure you like and subscribe. And for more videos and products like this, always keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 2 Hours
Simple installation for anyone.
What's in the Box
10 More Questions