(approx) 30 Minutes
Simple installation for anyone.
- Customer Submitted:
- How to Install Right Side Replacement Mirror - Textured Black on your Wrangler
$39.99 (each)FREE Shipping on orders over $75
Hey, guys. So today I'm here with the OPR Passenger Side Replacement Mirror, fitting all 2007 to 2018 JK Wranglers. So if you've damaged your mirror out on the trail or you're just looking to refresh some factory parts, this option by OPR is going to be a very easy and affordable way to do so. So this kit is just going to come with the passenger's side manual mirror, and it's going to resemble the factory mirror down to a T, with the fit, the finish, and even the function. Now, again, that's gonna be perfect for that Jeep owner who's just looking for an overall replacement to their factory mirror and isn't looking for those extra bells and whistles that some other options may come with. Now, I would like to mention that this is going to be for the manual mirror and will not include the wiring harness for the power and heated options. However, we do have those available on the page as well.Now, with all that being said, this is gonna be roughly $40, and again, that is going to be very affordable for a factory style replacement. There are other mirror solutions that are on the page and those are usually going to consist of trail mirrors, factory-style replacements, and upgraded factory housings. Now, those trail mirrors will usually just attach to the hinge or the A-pillar. Not really great for somebody who's looking for an overall replacement. Those more expensive options, on the other hand, are usually just gonna have some extra features to them, including lighting, as well as turn signals integrated into the housing. Now, again, if you're just looking for a factory style replacement, you're not looking for any upgrades or even trail mirrors for your Wrangler, this is going to be right up your alley. Now, install is going to be very easy, at a one out of three wrenches on the difficulty meter. You're only gonna need a couple of basic hand tools to get the job done. So, speaking of that install, let's jump into that now.The tools that I used for my install were a 3/8-inch drive ratchet, a 3-inch extension, and a T40 Torx socket.So for this install, our first step is going to be to open up our door so we can access our mirror bolts. So for this, you're only gonna need a T40 Torx bit or Torx socket. I'm also using a 3-inch extension just to give myself a little bit of room away from the door. We can just remove these two bolts inside of our door. Now, with the second one, you wanna make sure that you have a hand on your mirror because it will be disconnected once the second bolt is taken out. Once those two bolts are removed, we can go ahead and remove our mirror. What we can do next is take our replacement mirror, put that in the same mounting location, then we can thread in one of the bolts. Just make sure that it's staying in place. We can open the door back up, thread in our other bolt, and then go ahead and tighten that down with the same T40 Torx bit. After those are tightened up, we can close up our door and we'll be all set to go.So that's gonna wrap it up for my quick review and install. Make sure you like and subscribe. And for more videos and products like this, always keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Specs. If your passenger side OPR Replacement Mirror has suffered damage or been torn off while barreling along brush-lined trails, this replacement mirror provides an excellent substitute. It looks great, works great, and gives you the field of view you need.
Construction. This passenger side Replacement Mirror is designed to meet all OE standards of size, fit, and appearance, looking exactly like the part it replaces. This is a very good way to get back the high quality vision aid that has gone missing or suffered so much injury that it is high time to replace it.
Application. This OPR Replacement Mirror fits 2007-2018 JK Wranglers.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 15, 2020
Mirror works great. I had broken my old one and this was a very easy swap out.Helpful (1)
February 14, 2020
Poor fit, falls off
The fit is loose, nothing I nor a body shop could do to make it fit tight. about 6 weeks off dealing with it shaking going down the road, took it thru a touchless carwash and the mirror went flying off under the pressure wash. bolt head had snapped off.Helpful (1)
February 02, 2020
OPR Replacement Mirror
perfect fit, no issues, perfect for after market tube doors.Helpful (1)
January 22, 2020
Perfect, just like original.
Not much to say. Original mirror, great price and quick delivery.Helpful (1)
December 02, 2019
Distorted low quality mirror
It's better than no mirror at all, but I think I'd rather just pay more something of factory quality. The housing itself is fine, however the mirror is terrible.Helpful (2)
October 27, 2019
Worked just as it should. Very good product. If you need one, go get it.Helpful (2)
October 17, 2019
I like the mirror it looks like factory and gives it a clean look.. I mount it on a tube door. The glass moves when shutting the tubes doors, there is no way to tighten the glass so your constantly adjusting them.Helpful (2)
October 17, 2019
I like the mirror it looks like factory and gives it a clean look.. I mount it on a tube door. The glass moves when shutting the tubes doors, there is no way to tighten the glass so your constantly adjusting them.Helpful (3)
October 14, 2019
This product is just what it says it is. Perfect stock fit for my 2012 2-door jeep jk.Helpful (2)
October 01, 2019
The mirrors work perfectly on my trail doors. They stay in place o. The pavement or off road.Helpful (2)
Do these OPR mirrors work with the Smitty Built Gen 2- tube doors with the bracket mounted on the door? It shows in the video reusing the original Mopar factory mirror that came with the jeep. I want to leave them on my full doors and put the OPR mirrors on the tube doors. Are there any screws that do not work or are missing to mount them? Thanks for your help.
The relocation bracket included on this tube door will allow you to use any OEM style mirror such as the OPR models.
Well I got these mirrors, and since they don't come with the screws that are used to attach them I'm kinda hosed. Now where do I get the screws to attach them? The screws that come with my tube door do not work. They are too long.
The OPR Left Side Replacement Mirror will reuse the OEM hardware from the factory mirror. If the hardware is missing/damaged/unavailable, new screws can be sourced through a local Jeep Dealer.
Will these fit on the Rugged Ridge relocation brackets?
The Left Side Replacement Mirror - Textured Black (07-17 Wrangler JK) is engineered to fit and function exactly like the OE component it replaces. As this is OE style and function you should not have an issue installing this with relocation bracket that accept the OE mirrors.
Can you separate the mirror from the bracket?
The mirror assembly can be taken off of the door attachment bracket.
Hi, will this passenger side mirror fit my 2010 Jeep Wrangler Sahara? And will it match up to my still good factory driver side mirror? Thanks, Roger
Yes, the OPR Right Side Replacement Mirror is intended to be a passenger side OE style replacement for all 2007-18 Wrangler JK models.
The OPR Left Side Replacement Mirror is compatible with the Rugged Ridge Black Textured Rear Tube Doors.
Hello, these are not the power/heated mirrors, below you can find the link for those. These mirrors are an Excellent Factory Mirror Replacement. http://www.extremeterrain.com/right-hand-mirror-textured-jk-mcj13rh.html
Hello, the Left Side Replacement Mirror - Textured Black (07-17 Wrangler JK) does not come with the T40 Torx Screws
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box