(approx) 30 Minutes
Simple installation for anyone.
$39.99 (each)FREE Shipping on orders over $75
I'm Ryan from ExtremeTerrain.com, and this is my review of the replacement mirror fitting all 2007 to 2016 JK's. There's also a version of this that has a power adjustable feature and a heated feature if you have a 2011 to 2013 that had those features from the factory.These are for those of you who have a broken factory side view mirror that you're looking to replace, or those of you who have half-doors or tube-doors that are designed to accept a factory mirror, but aren't interested in moving your factory mirrors from your full doors back and forth. These will save you some money over those big name-brand mirrors on the market, and they'll definitely get the job done.As far as the way these are built and the way that they look, they're very, very similar to OEM mirrors which is exactly what they're suppose to be. They're a plastic housing with a metal mount, that are designed to mount in exactly the same way as your factory mirrors do. These ones are manually adjustable, and they're a little bit less expensive, but as I said before, if you have an '11 to '13 that has factory powered and heated mirrors, then you can get that replacement mirror for a little bit more money, and they'll plug right in.Getting these bolted up could not be any easier. The factory mirrors are held on to the door by two Torx bolts on the inside of the door. You don't even have to remove a door panel to get to them. All you need to do is open the door, remove those two Torx bolts, and then remove the mirror. If you do have that factory power option, you will have to unplug the wiring harness. Once the old mirror is out of the way, you can install the new one by first plugging it in, again if power is there, and then putting it into the door and replacing those two Torx bolts from the inside.The whole installation process shouldn't take you more than a half-hour. Even if you were doing a pair of these, I wouldn't expect it to take that long. You won't need any specialty tools at all. However, you will need a Torx bit, and there's a Phillips head screw on the bottom of this replacement mirror that you might want to tighten up so the mirror doesn't move when you're at highway speed.In my opinion, these mirrors are a really good value. Mirrors in general can be very expensive especially when you get into a power and heated mirror. But these will save you a lot of money over those bigger name-brands on the market. And by looking at it, no one would ever know that you replaced your factory mirror, and especially that you replaced it with one that saved you as much money as this does.So whether you're looking to replace a factory mirror that was broken on the road or on the trail, or you're tired of moving your factory mirrors from your full-doors onto your tube-doors, these will definitely get the job done, and they'll save you a lot of money over those big name-brand mirrors on the market.So that's my review of the replacement mirrors for all 2007 to 2016 JK's that you can find right here at ExtremeTerrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Specs. This sturdily built OPR Replacement Mirror gives you an excellent view to the rear while looking suitably rough and ready with its textured black surface and confident lines.
Construction. This OPR Replacement Mirror is for use when your original factory mirror is damaged or taken clean off by a passing branch. Made out of steel, it has a black matte textured powder coat paint job, and is engineered to fit and function exactly like the OE component it replaces.
Application. This OPR Replacement Mirror fits 2007-2018 JK Wranglers.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 15, 2020
Mirror works great. I had broken my old one and this was a very easy swap out.Helpful (1)
February 14, 2020
Poor fit, falls off
The fit is loose, nothing I nor a body shop could do to make it fit tight. about 6 weeks off dealing with it shaking going down the road, took it thru a touchless carwash and the mirror went flying off under the pressure wash. bolt head had snapped off.Helpful (1)
February 02, 2020
OPR Replacement Mirror
perfect fit, no issues, perfect for after market tube doors.Helpful (1)
January 22, 2020
Perfect, just like original.
Not much to say. Original mirror, great price and quick delivery.Helpful (1)
December 02, 2019
Distorted low quality mirror
It's better than no mirror at all, but I think I'd rather just pay more something of factory quality. The housing itself is fine, however the mirror is terrible.Helpful (2)
October 27, 2019
Worked just as it should. Very good product. If you need one, go get it.Helpful (2)
October 17, 2019
I like the mirror it looks like factory and gives it a clean look.. I mount it on a tube door. The glass moves when shutting the tubes doors, there is no way to tighten the glass so your constantly adjusting them.Helpful (2)
October 17, 2019
I like the mirror it looks like factory and gives it a clean look.. I mount it on a tube door. The glass moves when shutting the tubes doors, there is no way to tighten the glass so your constantly adjusting them.Helpful (3)
October 14, 2019
This product is just what it says it is. Perfect stock fit for my 2012 2-door jeep jk.Helpful (2)
October 01, 2019
The mirrors work perfectly on my trail doors. They stay in place o. The pavement or off road.Helpful (2)
Do these OPR mirrors work with the Smitty Built Gen 2- tube doors with the bracket mounted on the door? It shows in the video reusing the original Mopar factory mirror that came with the jeep. I want to leave them on my full doors and put the OPR mirrors on the tube doors. Are there any screws that do not work or are missing to mount them? Thanks for your help.
The relocation bracket included on this tube door will allow you to use any OEM style mirror such as the OPR models.
Well I got these mirrors, and since they don't come with the screws that are used to attach them I'm kinda hosed. Now where do I get the screws to attach them? The screws that come with my tube door do not work. They are too long.
The OPR Left Side Replacement Mirror will reuse the OEM hardware from the factory mirror. If the hardware is missing/damaged/unavailable, new screws can be sourced through a local Jeep Dealer.
Will these fit on the Rugged Ridge relocation brackets?
The Left Side Replacement Mirror - Textured Black (07-17 Wrangler JK) is engineered to fit and function exactly like the OE component it replaces. As this is OE style and function you should not have an issue installing this with relocation bracket that accept the OE mirrors.
Can you separate the mirror from the bracket?
The mirror assembly can be taken off of the door attachment bracket.
Hi, will this passenger side mirror fit my 2010 Jeep Wrangler Sahara? And will it match up to my still good factory driver side mirror? Thanks, Roger
Yes, the OPR Right Side Replacement Mirror is intended to be a passenger side OE style replacement for all 2007-18 Wrangler JK models.
The OPR Left Side Replacement Mirror is compatible with the Rugged Ridge Black Textured Rear Tube Doors.
Hello, these are not the power/heated mirrors, below you can find the link for those. These mirrors are an Excellent Factory Mirror Replacement. http://www.extremeterrain.com/right-hand-mirror-textured-jk-mcj13rh.html
Hello, the Left Side Replacement Mirror - Textured Black (07-17 Wrangler JK) does not come with the T40 Torx Screws
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box