2 More Questions

I have a 2.5 inch RC lift that included shocks and coil spacers. I would like to upgrade the coils. Can I use 4 in coils to eliminate the coil spacers? If I just replace the coils with 3 in coils, the ride height would be lower. 1 answer

• If you have a 2.5" lift and do not want to install any additional parts when you remove the coil spacers- we would suggest getting coil springs rated for 2.5" of lift. 4" coil springs will require you to upgrade a lot more parts and would give you 4" of lift.

Helpful (0) Thanks for your input!

I currently have the Rough Country 3.25" budget lift. The back end is starting to sag. More importantly, I drive across country for work, and tend to haul plenty of gear with me, and I will be doing some overlanding this summer. Can I put these springs in, in place of the 3.25" springs, to accommodate for the added weight, and prevent sagging? Thanks... 1 answer

• I do not recommend using the Teraflex 4 in. Coil Springs-rear pair with a 3.25" front spring, as all springs eventually sag and this will create a fairly large height difference front to rear. A 3.25" spring with a higher spring rate would be more ideal to keep an even ride height but also allow for increased weight capacity.

Helpful (0) Thanks for your input!