Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Serious Strength. Give your Jeep an aggressive look with the Smittybilt SRC Rock Crawler classic front bumper. This tough looking bumper has a thick look and comes in a black finish to go with your Jeep well. The bumper is designed to offer excellent front-end protection and comes fitted with mounts for lights and d-rings for accessories.
9"" Lights. The Smittybilt SRC Rock Crawler classic front bumper comes with mounts for up to 9"" lights to brighten up your nighttime driving.
Sturdy Steel. Thick steel tubing is used to build this bumper. The steel is robotically welded and coated with a powder coat finish and a zinc coating for excellent corrosion protection.
Easy Hardware Install. Use the included hardware to install this bumper without special tools or procedures. It can be put in place in just an hour with ease.
Lifelong Protection. Smittybilt is known for offering excellent long-term protection on its products. This bumper comes with a lifetime warranty and is protected against manufacturer defects.
Application. The Smittybilt front bumper is designed for 87-06 Jeep Wrangler YJ and TJ models.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Fitment: 1987 1988 1989 1990 1991 1992 1993 1994 1995 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 23, 2020
Bumper fit nicely. Only one down fall. The bumper wasn't made wide enough at the top to put the 4 factory bolts in. So the two bolts closest to the grill aren't doing any good. Hmmm.... an engineering oversite. Other than that, pretty satisfied.Helpful (0)
August 30, 2019
Exactly as expected! Looks great, classic style and super quality.Helpful (0)
May 09, 2019
SRC Rock Crawler Classic
Very pleased with this product! Seems like a quality made economical bumper. Have not used it for recovery yet, time will tell.Helpful (0)
April 20, 2019
well built and bolts on (four bolts)
I missed that the cut outs for the bolts would not allow for four top bolts instead of two. Granted four T 55 bolts are stout, but as the D rings are not for show, I hope I will not have an issue. That aside, quick install, and well built.Helpful (0)
September 17, 2018
Jeep front bumper
Nice piece! it's just what I was looking for, the blacked out look, heavy duty, but not extreme, with the ability to tow or pull on the front bumper and not have to worry about failure. The bumper fit right on my YJ! It was also shipped properly wrapped up to prevent ANY damage, Nice!Helpful (5)
July 05, 2018
this bumper fit perfectly on my 95 yj 4 cyl. it functioned great when i need a pull to get out of a mud hole in the woods. for the money, great buy!Helpful (6)
June 13, 2018
Smittybilt front bumper
Very nice finish,heavy duty. I really like the look.Helpful (5)
June 06, 2018
Pretty solid product! I was a little bummed that it doesn't use all four mounting bolts but other than that pretty satisfiedHelpful (6)
April 02, 2018
2000 Jeep Wrangler
Took me about 2 hours to install... the spacers that come with the bumper are to thick... ad to grind them down from 1/4” to 1/8” I’m not sure the only thing I could think of was the powder coat... looks like they didn’t take that into account. So instead of grinding my bumper I gridded the spacers to 1/8” with a hand grinder that’s what took me the longest... if it wasn’t for that it’s a 30 min job... Overall I’m pretty satisfied with the result now I need to install the rear bumperHelpful (7)
October 31, 2017
Easy as pie
Came in fast with easy set up. Looks great! Definitely reccomendHelpful (8)
Can this bumper be used, along with a tow bar, to be towed by an RV?
The Smittybilt SRC Rock Crawler Classic Front Bumper is not rated for towing. The D rings are designed for recovery purposes only.
Does this bumper include a winch mounting plate? Or holes to place a winch?
Hello! This bumper does not include a winch mounting plate or holes to place the winch through!
What is the part number for the winch plate that mounts to this bumper??
We would recommend Smittybilt part number 2803 for this bumper.
Is this the same as the Smittybilt SRC rear bumper - "textured black". I can't find a reference to the "textured black" description although the photos appear to show this.
This bumper will also come with the same black texture powerder coating as the other Smittybilt front bumper.
Will stock fog light be ab;e to mount to this bumper?
This has mounts for up to 9" lights to be mounted to it.
This bumper is 56" in length.
Yes, the Smittybilt SRC Rock Crawler Classic Front Bumper w/ D-Rings, (87-06 Wrangler YJ & TJ) is designed to accept most winches. However, the winch plate itself is sold separately.
Hello, unfortunately we do not have a grill guard for the Smittybilt SRC Rock Crawler Classic Front Bumper w/ D-Rings, (87-06 Wrangler YJ & TJ)
Simple installation for anyone.
What's in the Box