(approx) 1 Hour
Simple installation for anyone.
$329.99 (kit)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Lighting Upgrade. Take your Wrangler to a new level by upgrading with the Rugged Ridge A-Pillar Dual Light Mount Kit in Semi Gloss Black. This kit has everything you need to light up the trail, including four 3 inch square super bright LED lights and a pair of dual mount brackets. Simply bolt up, wire up your lights and roll out, with no extra fabrication to your Jeep or modding required.
Rugged Construction. Each light mount is constructed of heavy duty steel to stand up to the test of the trail. These brackets are finished in a long lasting semi-gloss finish to ensure performance and prevent wear. They mount directly to your windshield hinge using factory mounting locations for a simple and straightforward upgrade. Each mounting bracket is backed by Rugged Ridged with a 5 year limited warranty to ensure proper performance and reliability. Additional wiring or Rugged Ridge wiring harnesses (15210.62) are necessary for installation.
Application. These Rugged Ridge A Pillar Dual Light Mount kit in Semi-Gloss Black with Square LED lights is designed for installation on 2007-2018 Jeep Wrangler JK and JK Unlimited models.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
July 28, 2017
Super bright and easy to position for best lighting. One of the brackets was slightly bent making it hard to install, but ended up working out just fine with some persuading.Helpful (14)
February 09, 2017
So easy to install
This was so easy to install as far as the non electrical aspects of the kit. I read the reviews and one gentlemen said one of his mounting brackets was bent, I had no such issues. I like the fact that there were gaskets on the back side of the brackets to prevent scratching the paint. (Not really clear in the sales material) My only concern during installation was that reusing the existing torx in one location seemed a little short. I saved that for last and tightened up the other first which made that issue go away. I did a lot of searching for the proper electrical hock up and thanks to the internet came up with a least three good possibilities.Helpful (13)
November 01, 2016
Dual Light Mount
The Product looks great once installed. My only complaint would be that the brackets were bent slightly different with one lining up perfectly and the other requiring some bending and muscle to get lined up correctly. Aside from that, I am extremely satisfied with the product. Installation takes no time. Wiring of course can take some time depending on how neat you want it to be.Helpful (14)
September 07, 2016
Dual light mount kit
Love the product and was easy to install, would have paid a little more for the lights to come with the wiring harness but overall love them!Helpful (13)
August 24, 2015
Great lights and easy install
These lights were very simple to install. The only problem I had was the bracket will not fit over a light bar bracket. I modified the bracket and it fit perfectly. I would definitely recommend these lights.Helpful (13)
July 18, 2015
These lights are great.
Really lights up the area so you can see what is going on especially when your buddy is stuck and have to pull him out. Very easy to install only took 1 hour to do it. Makes your jeep look more bad.Helpful (15)
Will two wiring kits (Rugged Ridge Wiring Harness for Two Off-Road Fog Lights) have to be purchased for running this product? Thanks.
You can wire the Rugged Ridge 3 in. Square LED Lights w/ Semi-Gloss Black Dual A-Pillar Light Mounting Brackets how ever you'd like into two switches or one switch with the proper wiring. If using the Rugged Ridge Wiring Harness for Two Off-Road Fog Lights you'd need two kits with two switches.
Are these lights IP67 or IP68 rated?
These lights are not IP67 or IP68 rated.
Do you have to buy a wiring kit for these? If so, where?
Yes, you would need to purchase the wiring as well. We do carry it on our site, here is the part number: J13444, https://www.extremeterrain.com/rugged-ridge-off-road-light-1521062.html.
Do these mounts work over the top of light bar mounts?
Unfortunately, the Rugged Ridge 3 in. Square LED Lights w/ Semi-Gloss Black Dual A-Pillar Light Mounting Brackets were not designed to be used in conjunction with light bar mounts.
Are there cover available for these lights. I believe it may be required in my State
Hello, yes, we do sell the covers for these lights, which you can find here: http://www.extremeterrain.com/rr-3in-led-light-cover-1521047.html
(approx) 1 Hour
Simple installation for anyone.
What's in the Box