Turn your Jeep Wrangler into the smoothest-riding, best-handling machine on the street or trail by installing a Rough Country 3.50-Inch Control Arm Drop Suspension Lift Kit. With 3.50 inches of lift that can accommodate up to 35 x 12.50 tires, there are no obstacles you can't tackle with this Rough Country kit. With beefier V2 Monotube Shocks, forged adjustable track bar, lifted coil springs, and control arm drop brackets you will have a rig that can go almost anywhere.V2 Monotube Shocks.
Rough Country's V2 Monotube Shock Absorbers are engineered to meet the demands of the serious off-roader.Lifted Coil Springs.
The front and rear coil springs included in this Rough Country 3.50-inch Suspension Lift Kit have been engineered to work perfectly in conjunction with the other components of the kit. These springs will not only aid in lifting your Wrangler for increased clearance, but they will also help to provide a smooth comfortable ride.Control Arm Drop Brackets.
This Rough Country 3.5-inch Suspension Lift Kit also features control arm drop brackets. These Brackets have been engineered to relocate your factory control arms to the optimum geometry for absolutely incredible handling and driveability you won’t find in other setups.No Welding Required.
Rough Country designed its Suspension Lift Kit to be installed with no welding needed, making it a bolt-on kit. However, it should be noted that cutting and drilling is required for installation. With all the necessary hardware included, this Lift kit can be installed in about 4-5 hours time.Lifetime Replacement Warranty.
Rough Country Suspension Systems offers a Lifetime Replacement Warranty on most suspension products. All products are warranted to be free from defects in material and craftsmanship for the life of the vehicle if utilized in accordance with the manufacturer's instructions for installation and operation of said products. Subject to the terms and conditions, please see manufacturer's full warranty for details.Application.
This Rough Country 3.50-Inch Control Arm Drop Suspension Lift Kit with V2 Monotube Shocks is designed for use on 2007-2018 Jeep Wrangler JK 2-door models.Application Note.
2012-2015 models require exhaust modifications to clear the front driveshaft. For automatic transmission Wranglers: Due to the use of an oversize driveshaft from the factory and inadequate factory clearance, it may be possible for the front driveshaft to come in contact with the automatic transmission pan, tearing the factory boot and rubbing on the shaft. This generally occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov