(approx) 2 Hours
Light to Moderate mechanical skill required.
$184.99 (pair)FREE Shipping
Hey, guys. I'm Ryan from extremeterrain.com, and this is my review of the RedRock 4x4 Rocker Guards, fitting all 2007 to 2016 JKs.RedRock 4X4 offers these for both two-door and four-door Wranglers. These rocker guards are for those of you who have a factory side step and are looking for something a little stronger for off-roading, or are looking for a step that is high and tight up against the body, and does a good job of hiding the pinch seam. These are going to be stronger than those factory side steps or tubular steps, but they're not quite as strong as frame mounted armor. So, if you're doing light to moderate wheeling, these are going to be a good option for you. The nice thing is that they're also priced accordingly, so they're going to save you a little bit of money over more stout armor. These are built with tubular steel that is 0.12 inch wall thickness, and 1.75 inches diameter. You can tell when you look at the welds and especially when you pick these up, that they're built strong. The four-door weigh in at 72 pounds, and the two-door at 53 pounds. And they're both finished off with a textured black powder coat that is both corrosion and rust-resistant. These rocker guards you'll install just like a factory side step, to the pinch seam and the underside of the tub, so there's no drilling necessary. They're completely bolt-on. As far as tools, you'll need a set of sockets and all the hardware necessary is included in the box. The entire install will take about two hours from start to finish. These are really well priced for what you get. They're definitely more affordable than some of the stronger frame mounted armor, and they still offer a great step. All in all, this is a solid product at an affordable place. I'd recommend these rocker guards for anyone who needs some additional protection for light to moderate wheeling, is looking for a useful step and wants something that looks good and covers that pinch seam. You get all of that at an affordable cost, and an easy bolt-on installation.Remember, if you do some more serious off-roading, you'll want to look at some of our stronger frame mounted armor. So, that's my review of the RedRock 4X4 Rocker Guards, for both the two-door and four-door JKs that you can find right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 18, 2020
Looks great! gave my jeep a more rugged look that has worked well off-road so far! Took about an hour to install both sidesHelpful (0)
February 02, 2020
Sturdy, great fit
These rocker guards are built well, offer off-road protection and from door dings. They have that clean look I was looking for and can also be used as a step. Easy install and no drilling required.Helpful (0)
December 08, 2019
Great price ang great looking
These meet my needs, good looking and functional. Took about 2 hours to install. Jeep didn’t have the threaded holes as video shows, but the install kit has pieces to help. It’s ipa pain to set them, but once in works great.Helpful (1)
September 03, 2019
Not bad! Good bang for your buck
received the rock sliders with a little scrape. Good response time with CS and making it right. Instructions were written by a baboon, might as well throw it away. Lots of hardware not needed. Had to watch a different video for install a few times to figure the hardware pieces. No help needed other than a chair to hold and line up the ends while bolting it underneath. We'll see if this holds up on the trail.Helpful (1)
August 07, 2019
Easy install and looks great. They’re made of good quality, serve as great protection and a decent step. I definitely like how they hide the pinch seam so well.Helpful (1)
July 31, 2019
Shipped quick via freight. Bolt on installation. Recommend using a hydraulic floor jack to hold and finagle into perfect fitment. Had to slightly bend one edge of the mounting bracket. Product looks awesome. Very pleased.Helpful (1)
July 24, 2019
Passenger side dragged along a big rock from front to back and it held up very well!Helpful (3)
May 21, 2019
These were easy to install, they look great, and had all of the hardware required for the install.Helpful (2)
May 12, 2019
RedRock Rocker Guard
The rocker guards are very nice and easy install. Priced right and great qualityHelpful (1)
April 10, 2019
I love how easily they installed and look forward to the protection they provide.Helpful (1)
Do these weight 53 pounds each or 53 pounds together?
That is the total weight of both rocker guards.
Are there end caps on or are the ends open?
The ends are not open and are just part of the bar itself. If you take a look at the install video on the product page here, right around 3:55 you will get a good shot at that piece of the piping.
When i click on the product, it shows price as a (pair) but then it changes to (each). Is the price displayed for the pair or for each?
Thank you for your question! The price displayed on the product page is for the pair.
I'm planning on ordering these rocker Guard along with a rugged ridge tube front bumper (J15648) and a smittybuilt rear bumper (J17266). How well do the textured black finishes match up?
Hello, the textured black finishes should be very similar, but since you are getting different brands, we wouldn't be able to guarantee you they would match up 100%.
Do they flex and hit the body. And will they hold up to light rock crawling
The RedRock 4x4 Rocker Guard will not hit the body in normal use, however if hit hard enough they may bend which could possible cause them to contact the body.
The RedRock 4x4 Rocker Guard can be used as a high lift jack mount, however due to their tubular nature, they will not provide the most stable location.
The Bumper pictured is an ACE Stubby Bumper, which we no longer carry.
We do not advise using the RedRock 4x4 Rocker Guard as a side step, as their positioning is rather high for a step, and there is no anti slip coatings or designs built into this.
Hello, Unfortunately we do not have a specified weight limit on these. It depends on how hard of an impact it is. These do offer great protection. If you wanted to give us a call we could further assist you.
Hello, yes, the Factory Rock Rails will have to be removed to be able to install these Rocker Guards.
No, these guards are body mounted but do not require drilling for installation.
(approx) 2 Hours
Light to Moderate mechanical skill required.
What's in the Box