Customer Reviews (11) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Less than 1 Hour

• Protection 4.818182 4.8
• Fit 5 5
• Appearance 4.909091 4.9
• Bang For Your Buck 4.7 4.7

• 5/5

  Installation Time: Afternoon

  August 19, 2018

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Tough and Thick

  Love this Evap Skid Plat. My factory plate tour up my boot on my stock driveshaft. I trust that this one will not move towards the driveshaft for any reason. I also drilled new holes to pull it away from the driveshaft for extra precaution just in case the boot gets too close during flexing the 4" suspension lift. I was able to move it over by about 1" to 3/4". That should work just fine. Very impressed with M.O.R.E. products.

  LukeH

  Year: 2017Submodel: Wrangler

  Helpful (1) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  August 01, 2018

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Solid...

  Bought this after smashing up my stock evap cover. Easy install, just cut the 2 short ends near the hoses vs. Undoing all the clips. Solid is all I can say, easy install took all of 30 minutes.

  MarkM

  Year: 2016Submodel: Rubicon

  Helpful (1) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  April 10, 2018

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Quick install. Fit great

  The Evap Skid Plate by M.O.R.E fit great and took only a few minutes to install. Watched YouTube videos before trying to disconnect the lines. Haven't tested it yet but it look heavy enough to support the weight of the Jeep.

  MikeB

  Year: 2015Submodel: Rubicon

  Helpful (2) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  June 10, 2017

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Way the heck overbuilt!

  This will protect your Evap canister from literally anything - you could probably use this as a friggin jack point. This thing is thick, heavy and super strong! Taking the lines off to remove the OEM skid is an incredible pain in the butt so be prepared to invent a few new cuss words as you try to pry those little pins out - but once that is done the plate slaps right on in all of 15 minutes (and is big enough at the end that you can service the evap canister without having to remove those lines again). Really, really great product. Highly recommended!

  RobertS

  Year: 2017Submodel: Wrangler

  Helpful (3) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  January 03, 2017

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Easy install and supper heavy duty

  Strong, heavyduty, easy to install. Recommend for sure.

  Happyface

  Year: 2016Submodel: Wrangler

  Helpful (2) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  December 14, 2016

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Very well built, great design.

  The m.o.r.e. evaporated skid is very well built. It came very well packaged as well. Installation was a breeze. Simple hand tools are all you need. Took me about an hour. I would caution that the factory clips in the evaporated lines, mostly the lower one, can break if your not every careful. Overall, a great addition to any jk protection package.

  Yrman12

  Year: 2014Submodel: Rubicon

  Helpful (2) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  August 11, 2016

  Sturdy and tough

  Took to an off-road park and rode rocks without any problem. A lot more tough than the stock skid. It took no time to install and would recommend to anyone looking for an evap skid.

  Eljay

  Year: 2007Submodel: Rubicon Unlimited

  Helpful (2) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 4

    4

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Afternoon

  July 23, 2016

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  MORE EVAP SKID

  I've had mixed feelings about MORE. Some of their skid plates are very challenging to install and not on par with competition. This however, is not the case with their EVAP skid. It locks into the frame using factory holes (no drilling yay!), and it is infinitely more sturdy than the factory EVAP skid plate. The hoses are hard to remove, especially if there is any kind of mud or dust on them. The little clamps on them break quite easily, as I learned. NAPA sells them for several dollars if you break them. After you install this skid plate, you wont have to take the hoses off of your EVAP tank if you need to work in that area (or take off the skid for whatever reason). The entire EVAP tank with wires can slide right on out once all the securing bolts have been removed. Very convenient. Would recommend this skid to anyone doing any kind of offroading involving rocks.

  Nick

  Year: 2015Submodel: Wrangler

  Helpful (1) Thanks for your input!

  • Protection 4

    4

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Afternoon

  July 14, 2016

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Can you say "solid"

  You will not know how flimsy the OEM one is until you take it off. Most difficult part is removing the lines, the clips that hold it on are a bit tricky. Used ramps on the rear and done in a jiffy. I suggest watching the you-tube video prior for some tips.

  JeepinGeo

  Year: 2015Submodel: Rubicon Unlimited

  Helpful (2) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  June 12, 2015

  Great Skid Plate

  Easy to install. Great fit and apperance. Will be buying more of their products.

  SCWBIGWHEELER

  Year: 2007Sun City West, AZ, USA

  Helpful (3) Thanks for your input!

  • Protection 4

    4

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  March 13, 2014

  Review from M.O.R.E. Evap Skid Plate (12-18 Jeep Wrangler JK)

  Stout evap skid

  This is probably the most well thought and strongest skid on the market. Very easy to install. I am sure it will stand up and nicely priced too.

  Gperscreepers99

  Year: 2014Wheaton, IL, USA

  Helpful (3) Thanks for your input!

  • Protection 5

    5

  • Fit 5

    5

  • Appearance 5

    5