Installation Time
(approx) 2 Hours
Difficulty Level:
Simple installation for anyone.
FREE 1 to 3-Day Delivery on Orders $149+ Details
$499.99 each
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Features, Description, Reviews, Q&A, Specs & Installation
| Brand | Jeep Licensed by RedRock |
| Bumper Type | Full Width |
| Bumper Location | Rear |
| Bumper Material | Steel |
| Bumper Finish | Black |
| Bumper Winch Mount | No Winch Mount |
| Bumper Fog Light Fitment | No Fog Lights |
Perfect For Off-Road Use. This Jeep Licensed by RedRock HD Rear Bumper will provide excellent protection from all kinds of off-road hazards while giving your Wrangler rugged off-road styling. Featuring two high strength D-Ring mounts with 9,500 lb. rated D-Rings, this heavy duty Bumper is perfect for those who don't shy away from adventure.
Heavy Duty Construction. This Jeep HD Rear Bumper was manufactured to precise specifications from 3/16-inch thick mild steel plating for superior strength and rigidity. The Bumper is then completed in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting durability. The D-Ring mounts are welded both inside and outside for extra strength.
Officially Licensed Jeep Product. This HD Rear Bumper features an officially-licensed Jeep Logo laser cut in the center that is backlit by LEDs for an impressive accent that’s sure to catch the attention of fellow Jeep enthusiasts. With this Bumper being officially licensed, you can be assured that it is only of the highest quality.
Bolt-on Installation. This Jeep Licensed by RedRock Rear Bumper was engineered to be a direct bolt-on upgrade replacement for your Jeep's original stock bumper reusing the factory mounting points. There is no cutting or modifications required for a simple, straight forward install. With the help of a friend and a set of basic hand tools, this HD Rear Bumper can be installed in about 2 hours.
Installation Note. Minor wiring required if desired to splice backlight into vehicle lighting circuits (does include standalone harness with switch). Minor wiring required to splice license plate lamp bolts into license plate lamp harness.
Application. This Jeep Licensed by RedRock HD Rear Bumper with LED Jeep Logo Backlight is designed to fit 2018-2026 Jeep Wrangler JL models. This Rear Bumper is designed to work with models that are equipped with or without rear mounted backup sensors.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Jeep Licensed by RedRock J245936
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 2 Hours
Difficulty Level:
Simple installation for anyone.
What's in the Box
Tech Guides:
Jeep Licensed by RedRock offers our valued customers the following Limited Warranty on all Jeep Licensed by RedRock product purchased after September 1st, 2026.
What is Covered
Subject to the terms, exclusions and limitations herein, and with respect only to products first sold in the United States, Jeep Licensed by RedRock warrants that its products shall be free of manufacturing defects for the lifetime of the product and finish defects, including rust & corrosion, for three (3) years from the date of initial retail purchase when the Jeep Licensed by RedRock product is installed and used on purchaser's vehicle according to supplied product installation instructions and/or warnings. This Limited Warranty is made only with respect to the initial purchaser and is not transferrable. Jeep Licensed by RedRock reserves the right to require proof of purchase as a condition of this Limited Warranty and to make future revisions to this product or its Limited Warranty without obligation to provide notice of same to purchaser or to conform existing product to future revisions. Any change to this warranty made after purchase may be applied retroactively at the sole discretion of Jeep Licensed by RedRock.
What is Not Covered
Your Jeep Licensed by RedRock Limited Warranty does not cover damage or claims to any component, vehicle, or person other than the Jeep Licensed by RedRock product purchased. Your Limited Warranty is expressly limited to replacement of the item itself shall Jeep Licensed by RedRock determine item was not free of defect. As such, this Limited Warranty does not cover damage or claims to any component, vehicle, or person Jeep Licensed by RedRock determines to have been damaged by or subjected to:
Remedy Limited to Repair/Replacement:
The exclusive remedy provided for products covered under this Limited Warranty shall be, upon Jeep Licensed by RedRock's inspection and at Jeep Licensed by RedRock's option, either repair or replacement of product or parts (new or refurbished). Any parts repaired or replaced will be considered part of the original product and will not extend the term of Limited Warranty. Customers requesting warranty consideration should first contact the independent distributor selling your product to obtain a Returned Goods Authorization number. All removal, shipping, and installation costs are customer's responsibility. If a replacement part is needed before your part can be returned, you must first purchase the replacement part. Then, if Jeep Licensed by RedRock determines the part warrantable, you will be credited the purchase price of that part.
This warranty is the only warranty made in connection with the purchase of this product. Jeep Licensed by RedRock neither assumes nor authorizes any manufacturer, vendor, retailer, other person or entity to assume for it any other obligation or liability in connection with its products or this Limited Warranty.
Other Limitations - Exclusion of Damages - Your Rights Under State Law: