Clayton Off Road Rear Track Bar Relocation Bracket (07-18 Jeep Wrangler JK)Find parts that fit my vehicle

Jeep Wrangler Rear Track Bar Relocation Bracket (2007-2018, JK)

After seeing some other aftermarket track bars bend or rip the OEM track bar bracket off the axle, we knew we had to design something that would take some of the force off the OEM bracket. Our track bar bracket is laser cut from 1/4 metal, and uses the OEM trackbar bracket for alignment and ensures it is properly installed. The additional strength comes from the clamping force around the axle tube. Now the forces are distributed between the factory mount and clamping around the axle tube and failure is not a concern.

This bracket can be used with the OEM track bar or our adjustable track bar. Works with lifts from 2-6 inches.

Product Features:

• Bolt On Design
• CNC Laser Cut & Bent
• 1/4 Inch Steel
• Dual Hole For 2-6 Inch Lift
• Clamps Around Tube For Superior Strength
• Made In The USA!

Note: Track bar bracket Must be bolted into the stock axle location And clamp around the axle tube!

Features:

• Bolt On Design
• CNC Laser Cut Bent
• 1/4 Inch Steel
• Dual Hole For 3-6 Inch Lift
• Clamps Around Tube For Superior Strength
• Made In The USA!

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov