(approx) 1 Hour
Simple installation for anyone.
Open Box from $162.24
Features, Description, Reviews, Q&A, Specs & Installation
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Fitment: 2018 2019 2020
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 30, 2019
Nice light bumper for basic protection
I received this for a Christmas present from my wife for my 2019 JL Sport. This is my 4th Wrangler (TJ, 2 JK, 1JL) and i have always wanted a bumper and a winch. The bumper is pretty light and easily put on with the help of an assistant to just get a couple of bolts lined up and started. After the bumper was off, it went on in about 45 minutes. The bumper removal video was from a JK so i just found a bumper removal from a 20XX JL. It was ok, i just had to figure out a few things. It took about 1.5 hrs between starting, looking at the videos and detaching the fog light wires. Speaking of which, if you put this bumper on a 2019 Sport S, you don't need the wire adapters. Next came the Barricade 9,500 lb. Winch w/ Synthetic Rope Item J100789 but that's in another reviewHelpful (1)
November 28, 2019
Needed more protection and to keep the front end light. We got both with this bumper. Very happy with this addition to our Jeep.Helpful (1)
November 16, 2019
Super easy install. Steel where it needs to be. No rust.Helpful (1)
September 05, 2019
Extremely light weight and easy to install. 2019 JL Rubicon factory fog lights fit great with slight adjustments. Looks amazing on the Jeep. Followed the video instructions and had no issues with installation. Great addition to the RubiconHelpful (1)
August 24, 2019
Not so strong
I purchased this bumper thinking it would look great and provide support for a winch and not easily bend during off road activities. The winch is mounted, its a tight fit but the lower front slope is short, thin and bent during my first off road adventure, granted it was challenging with large rocks and other ares with deep mud but upon our successful arrival to the top of a mountain (11,665’) I found damage to the bumper and mud with shrub roots jammed in areas the bumper should have protected. Its an easy fix but I feel the bumper fell short of my expectations.Helpful (2)
August 15, 2019
Love the bumper!
Install was easy by myself. I do recommend having an adjustable height work stand ready to hold the bumper and winch plate up while you get the bolts in place. I also installed a SmittyBilt X20 winch and it fits, but is really close to the grille. Weight of the bumper is pretty low. Just wish they had a rear bumper that matches.Helpful (1)
August 01, 2019
Barricade Aluminum Front Bumper, JL
This bumper is Nice! It's well made, even the hardware is good quality and color matched. The bumper is extremely light and ridged. The winch plate is heaver but solid as a rock. It fits nice, looks great. I'm Impressed. Now it's play time.............Helpful (1)
June 06, 2019
Looks good and pretty easy to put on. It fit the Smitybilt X20 10,000k Gen 2 Wench perfectly.Helpful (1)
February 26, 2019
I installed this Aluminum series bumper on my 2018 Rubicon Unlimited (plastic bumper group with factory fog lights.) This bumper has a nice coating and the bumper itself is very light weight. The mounting bracket and D-ring plates are steel and still very heavy but the need to be. I Installed this in conjunction with the barricade skid plate and removed the factory junk that only appeared to protect the sway bar disconnect. To do this you will need to space three of the four (per side) bolt holes out approximately 3/16” You could do this by either using washers or like I did and cut an aluminum plate to space it for proper mounting. You may also need slightly longer hardware if you are doing this... I did not but it was very close to me having to replace these bolts with longer ones. As far as my factory fog lights (rubicon) they will fit in the bumper but you may have to get creative with mounting hardware a little. I also bought the lighting harness extension for the lights thinking I would need them but again on the rubicon model after I removed the harness from the factory plastic bumper I had plenty of wire to route to each light and secure just under the grill. The instructions that come with the bumper are limited (to say it nicely) watch the XT install video it will be very helpful to you. Also make sure you have a buddy to help you line up all the bolts and mount the bumper when the time comes. Mounting this bumper (three separate pieces; bumper, mount plate, and D-ring mounts bolts nuts and washers) can be compared to balancing a pint of your favorite brew on your head wile making a 20’ putt with one hand and throwing a bullseye with the other standing on one leg. It can be frustrating but just take your time and you will find it is very doable. Also This bumper shipped missing the D-ring mounts, I called XT and they eventually got me straightened around. Extreme Terrain has excellent customer service. Thanks again XT and good luck fellow Jeep enthusiasts!Helpful (4)
February 07, 2019
still waiting on d ring brackets.
Easy install had to modify fog light brackets to make my fog lights work. Very nice bumper, looks great on the jeep. Would look even better if it had the d-rings brackets.Helpful (5)
Is there a skid plate for this bumper
With some modification, the Barricade skid plate(J123338-JL) will work with this item. The 4 way brackets would not be reused to get both items to work together.
What does the description mean by "excluding Rubicon models"? Will Rubicon LED fog lights not fit?
This Bumper is only compatible with the OEM LED Fog Lights, and Rubicon models fog lights will not fit.
Is it better to install first the winch on the bumper before installing the bumper on the Jeep, or is it better the install the winch after the bumper is installed on the Jeep?
I would recommend installing the bumper first then the winch.
Would like to know the overall width of this bumper?
The Barricade Alloy Series Aluminum Front Bumper measures in at 70 inches wide.
Any chance on a matching alloy series rear bumper with sensor cutouts ?
At this time we do not offer an alloy series rear bumper.
The Built-in Winch Plate is Rated up to 12,000 lbs
This bumper will accept any winch with the standard 4.5x10" mounting bolt pattern.
This bumper would not have any provisions for mounting a license plate to it no.
The Barricade Alloy Series Aluminum Front Bumper requires to torque the bolts down to 66.5 lbs.
The bumper will not interfere with the impact sensors.
The Barricade Alloy Series Aluminum Front Bumper (2018 Wrangler JL) is not flat tow rated.
We do not currently offer a skid plate that its compatible with this bumper.
No, there is not a model of this bumper that is compatible with Rubicon OEM LED fog lights.
Until we begin to offer Gladiator parts on the site, we cannot assist with Gladiator fitment.
We do not recommend flat towing with this bumper.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box