(approx) 2 Hours
Simple installation for anyone.
$535.99 (each)FREE Shipping
Open Box from $238.00
Features, Description, Reviews, Q&A, Specs & Installation
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 02, 2020
Great bang for your buck
Looks great exactly what I have been wanting couldn’t have been happier!!!!! Just make sure the fog lights are projector type its doesn’t work with those three line led light due to the alignmentHelpful (1)
October 24, 2019
Defective Fog Lamps
Thus far I am satisfied with the bumper. My issue is blemished fog lamp lenses. My original shipment had one good fog lamp, and one with a white discoloration inside on the lens. It is not condensation. I made a claim, received a replacement, and it was the same. I made another claim, received the replacement, and it was the same. Awaiting my fourth replacement. Customer service is extremely attentive and accommodating but this is ridiculous. They have a supply problem and need to get it corrected. Very frustrating!Helpful (1)
September 06, 2019
Love it, simple to install and looks great on my jeep! Have gotten lots of compliments!Helpful (1)
May 21, 2019
Nice bumper / bang for your buck
The bumper is a good quality bumper. Installation was a little difficult with getting the LED fog lights in (need infant sized hands). When securing the bumper to the frame, it was pushing up against the front flares on my JLU. Nothing cracked or chipped, but I was under the impression there would be a slight gap. There isn’t. You can’t even put a piece of paper between the parts. Overall, it’s worth the money.Helpful (1)
May 20, 2019
Nice bumper but coating is peeling
We have had the bumper on since July 2018 and now the coating is peeling off and rusting. Not sure what to do except take it off and have it blasted and line X put on it. Sad coating on these bumpers.Helpful (1)
May 11, 2019
Barricade front bumper
Great buy, looks sharp. I currently have a barricade winch on back order. That will go on once received.Helpful (1)
April 27, 2019
Easy to put on fog lights may need different resistorsHelpful (1)
April 18, 2019
Love this bumper,looks great, easy to install,and rugged!Helpful (1)
March 25, 2019
Barricade is the bomb!
Had another after market hunk of steel on my front and finally pulled the trigger and bought a Barricade. Glad I did! Easy to re-install my winch and extra lighting. Looks well built, heavy and solid. Cannot go wrong with this. Oh, installation took a bit longer than expected, had to cut a bumper bolt off. It was rusted and frozen.Helpful (1)
February 13, 2019
Great bumper, but install issues
I like the bumper but did have some install issue I will describe. 1. The mounts for the fog lights were a pain. They used very small diameter screws and you had to hold the washers and nuts blind to install the screws. I wonder if they could have used a little bit bigger screws with standard heads and installed the bolts from the bottom and then the washers and nuts on top. 2. The bolts that come with the bumper are too short to use with the standard reinforcing plates Jeep uses on the stock bumper. I went to the hardware store and bought longer bolts so I could use those plates. 3.The relays for the included fog lights are worse than useless. I understand using a relay, but whoever wired these up does not. Normally you would use the stock wiring to trigger the relay and then another wire back to the battery would carry the full current for the lights. But these don't do that. The use the wiring from the fig lights to switch the relay AND power the lights, so the way they come they actually draw more current than the lights do alone. As such I removed the relays and just run the new LEDs off the stock wiring with no issues.Helpful (5)
Virginia requires having a front license plate, I purchased this bumper and need an idea on how and where to mount it?
You can use several items, see items J127056 or J112801
Will this require relocation of vacuum pump? I hope not!
The Barricade Extreme HD Full Width Front Bumper w/ LED Fog Lights will not require you to relocate your vacuum pump.
Once this bumper is installed can a Barricade or Smittybuilt 9500lb winch be added later or does the bumper have to be pulled off
While a winch can be installed with the bumper on, install will be considerable easier with the bumper off.
I live in Texas, and therefore have to have a front license plate. Is there are place on this bumper to attach one?
You can use several items to mount a license plate. J126791 or J109043
Will this fit with 33” tires?
Yes, this bumper is compatible with 33" tires and will have enough clearance as well.
We cannot offer this bumper with a gloss (shiny) finish.
Yes, there are quite a few that would work as replacements. I have added a few below! https://www.extremeterrain.com/axial-led-fog-lights-w-drl-0718-jk.html https://www.extremeterrain.com/dv8-off-road-4-replacement-led-fog-lights-0717-jk.html https://www.extremeterrain.com/kc-hilites-4-gravity-g4-clear-led-replacement-fog-light-1017-jk.html
This bumper is compatible with 35" tires and you will have enough clearance with those 35's
At this time we do not have info on the brand or style LEDs used in the light housings. The individual LEDs are non serviceable.
This bumper is not rated for towing and it is strongly advised not to use this for a tow bar.
The fog lights can be replaced under warranty, but factory or factory-equivalent lights can also be used.
(approx) 2 Hours
Simple installation for anyone.
What's in the Box