Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
Everyday 8:30AM EST - 11:00PM EST
Win 1 of 2 $3,000 Builds! Enter Daily!

AFE Magnum FORCE Stage 2 Pro 5R Cold Air Intake - Black (12-18 3.6L Jeep Wrangler JK)

ExtremeTerrain no longer carries the AFE Magnum FORCE Stage 2 Pro 5R Cold Air Intake - Black (12-18 3.6L Jeep Wrangler JK). Please check out 2007-2018 JK Jeep Wrangler Cold Air Intakes & Air Filters for an updated selection.

Features, Video & Details

  • Increases of up to 12 HP and 13 ft/lb TQ
  • Improves Fuel Economy
  • Dyno Tested Intake Tube
  • Black Roto-Molded Tubing
  • 360 Degree Radial Flow Air Filter
  • Factory Oiled, Blue Pro 5R Cotton Gauze Filter
  • Washable and Reusable
  • 1-Piece 18 Gauge Black Powdercoated Heat Shield
  • 50 State Legal - 2012-2013 Model Years Only
  • Easy Installation
  • Made in the USA
  • Fits 2012-2018 Jeep Wrangler JK Models

Review & Installation Video

Review & Install Video

Horsepower and Torque Increase. Boost the horsepower and torque produced by your 2012-2018 Jeep Wrangler JK by upgrading the factory intake to this AFE Magnum FORCE Stage-2 Pro 5R Cold Air Intake System. This intake provides 48% more airflow, increasing the horsepower level up to 12 horsepower and up to a 13 foot pound increase in torque as well. The AFE Magnum FORCE Stage-2 Pro 5R Cold Air Intake System is a great option to enhance performance without any major modifications needed.

Improved Fuel Economy. More air equals better fuel combustion and that produces more power and torque at the same time. This AFE Magnum FORCE Stage-2 Pro 5R Cold Air Intake System incorporates a dyno tested intake tube to ensure the maximum amount of air possible is available for fuel combustion.

Quality Construction. Complete with a heat insulting black roto-molded intake tube, this Magnum FORCE CAI features a blue 5-1/2" Pro 5R cotton gauze filter that is designed to be washed and reused for many miles to come. The progressive 5-layer, factory oiled, 360 degree conical filter allows for maximum air flow for improved performance. Also included is a one-piece heat shield that's been black powdercoated and keeps hot air away from the filter.

CARB Certified. Made in the USA, this AFE Magnum FORCE Cold Air Intake System is street legal certified under CARB EO Number: D-550-14 for the 2012-2013 model years only.

Installation. This AFE Magnum FORCE Stage-2 Pro 5R Cold Air Intake System is a bolt-on application with all of the necessary mounting hardware provided. The intake is sold as a kit and no modifications or drilling is needed to complete the installation process.

Application. This AFE Magnum FORCE Stage-2 Pro 5R Cold Air Intake System is specifically designed to fit on the 2012-2018 Jeep Wrangler JK models equipped with the 3.6L V6 engine.

Fitment: 2012 2013 2014 2015 2016 2017 2018 Details

CA Residents: Warning: California's Proposition 65

What's in the Box
  • (1) Air Filter Pro-5R
  • (1) Intake Tube
  • (1) Heat Shield
  • (1) Straight Coupling
  • (1) Hump Coupling
  • (1) Hose (9-inches)
  • (1) Adapter
  • (1) Grommet
  • (1) Urethane Spacer
  • (1) Seal Trim
  • Mounting Hardware
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2012-2018 JK Filter Placement: Engine Bay
Material: Polyurethane Finish: Black
Manufacturer: AFE Computer Tune Required: No
Will it fit my Wrangler?
  • JK Rubicon 2 Door - 12, 13, 14, 15, 16, 17, 18
  • JK Rubicon 4 Door - 12, 13, 14, 15, 16, 17, 18
  • JK Wrangler 2 Door - 12, 13, 14, 15, 16, 17, 18
  • JK Wrangler 4 Door - 12, 13, 14, 15, 16, 17, 18

You Might Also Like

Customer Photos (5) Submit Your Photo

View All 5 Photos

More Products You Might Like

Questions & Answers (3)

3 Top Rated Questions

Will this fit with a throttle body spacer?

  • Yes, this intake can be installed with the throttle body spacer without any issues. The spacer will sit behind the factory throttle body which won't affect fitment if you want to install an aftermarket cold air intake.

Helpful (0)

Is this legal in California?

  • Hello! This AFE Magnum FORCE Stage-2 Pro 5R Cold Air Intake System is street legal certified under CARB EO Number: D-550-14 for the 2012-2013 model years only. 

Helpful (0)

Which Cold air intake can i use with the rugged ridge xhd modular snorkel?

  • The Rugged Ridge XHD is intended for use with the factory air box. A snorkel requires use of a sealed air box for the snorkel to function properly and not allow water in. Most Cold Air intakes are open, to allow for more air flow which will not allow them to work with a snorkel. You will need to either find a cold air intake in a sealed air box or stick with your factory air box.

Helpful (0)
Post Your Question

People Who Bought This Item Also Bought

Customer Reviews (13) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 4.461538 4.5
  • Fit 5 5
  • Bang For Your Buck 4.615385 4.6



  • 5/5

    Installation Time: Less than 1 Hour

    July 26, 2018

    New Cold Air Intake

    Super pleased with this upgrade! When I stomp on it, it gives a real nice low rumble! This paired with my Gibson Metal Mulisha exhaust kit, I’ve got all the sound I need! Pretty easy to install! Temp sensor was the only thing that took a little more time but again really easy! Very happy!

    CalebF

    Year: 2017Submodel: Wrangler

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    July 10, 2018

    An excellent addition to my Rubicon

    Hands down a great purchase. I have noticed more throttle response better gas mileage and more horsepower. If that’s what you’re looking for then this product is for you. Don’t believe all the negative reviews. It’s easy to install and lots of fun once it’s all buttoned up under the hood. Thanks AFE and Extreme Terrain.

    Ryan

    Year: 2017Submodel: Rubicon

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    May 23, 2018

    Sounds awesome

    Very easy to install. Increase low end power and 2-3 mpg. Sounds great when accelerating.

    BrockB

    Year: 2017Submodel: Wrangler

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    May 11, 2018

    Cold Air Intake Upgrade

    A very noticeable (but not annoyingly loud) and exciting growl/rumble upon accelerating definitely made this worth it. I have a 2014 JK Unlimited with a 4" lift and gained 1.5-2.5 MPG. Not a whole lot, but for the price, a little rumble and little MPG improvement was perfect.

    MarkT

    Year: 2014Submodel: Wrangler

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 09, 2018

    nice cold air setup

    this was a very easy install with the exception of the temperature sensor. I used a sharp knife to lightly chamfer the bushing hole in the plastic tube. It's sharp edges hindered the installation of the bushing. After several tries of putting the bushing in first then the sensor I gave up. I put the temp sensor in the bushing then gently put the bushing in the tube. I used the side of a screw driver blade to push the bushing into the hole. This cold air box sounds awesome, It does feel like the Jeep has more power

    TimothyO

    Year: 2017Submodel: Wrangler

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 08, 2017

    Great Buy

    Great sound on acceleration and noticeable power increase. Easy install in less than 40-minutes. Great buy!!

    KennethR

    Year: 2016Submodel: Wrangler

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    September 20, 2017

    It gives my jeep a nice soud

    It gives my jeep a great sound not like stock.Paired with MagnaFlow axle back Muffler really changes the feel and sound of my jeep.I deftly recommend. Better throtel respond and installed in less than an hour.

    Benjamin

    Year: 2017Submodel: Rubicon

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    August 11, 2017

    Air Intake

    Easy to install and noticed the difference right away. Thanks

    JamesT

    Year: 2015Submodel: Wrangler

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    June 26, 2017

    Worth Every Penny

    This system is Awesome!!!!! Sounds like a beast when you get on it. Easy install, perfect fit, looks great. Not sure on the fuel/performance gain yet but happy with it so far.

    KeithH

    Year: 2017Submodel: Wrangler

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    June 22, 2017

    Good addition

    Noticeable performance boost. Louder than expected. Easy to install and fits and looks like it was stock.

    RobertR

    Year: 2017Submodel: Rubicon

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    June 08, 2017

    AFE Magnum Force Cold Air Intake

    Love the sound and pick up!! I did get a slight improvement with the fuel mileage, but I have become a bit heavy on the throttle! lol. So, I have not observed the best while aggressively accelerating from light to light. When I go on a long road trip, I do notice an improvement with mileage. Great product.

    David

    Year: 2016Submodel: Wrangler

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    March 06, 2017

    Worth the money

    Everything was package nicely and arrived to Hawaii without any damage. Install was pretty painless other than the air temp sensor, it was a bit of a pain to get the grommet and sensor pushed in correctly. Total time was about 40 minutes. On hard acceleration there is a very nice, and pretty loud throaty growl; very good sound. At lower accelerations its still awesome, you'll want to be hard on the pedal most of time because it sounds pretty really good. I have noticed a little better throttle response and the engine doesnt struggle quite as much up hills as it used to. This, paired with the magnaflow dual exit cat-back will be a nice duo.

    mauijeep

    Year: 2014Submodel: Wrangler

    Helpful (4)

  • 5/5

    November 19, 2016

    AFE Cold Air intake

    Item arrived packaged very well. Instructions were pretty good and the installation was pretty easy except for the temp sensor grommet. Every time I pushed the sensor in it popped the grommet out. I was told to put a little oil on the inside of the grommet and on the O ring of the sensor. Once I did that, some careful pushing got it in place. I also added an Air Raid throttle body spacer. This did make the tube on the cold air intake almost hit the fan shroud near the last clip that hold the coolant return line. All in all, a pretty easy install. I am noticing better acceleration and the Jeep does not seem to be struggling to travel between 65 to 75 on the highway. It also has a nice sporty growl during acceleration. As far as fuel saving I can not report any huge findings yet but if anything noticeable pops up I will update.

    JRP70s

    Year: 2016Submodel: Wrangler

    Helpful (3)

Related Wrangler Categories