The TeraFlex Alpine Rear Upper Long FlexArm gives you the complete alignment adjustability that you demand for your Jeep once you have given it that 3" to 6" lift. That lift gave you the clearance and attitude you wanted, now you can dial it in perfectly with these long flexarms to give you maintenance-free performance and optimized caster and pinion angles.
The tubing for this long flexarm is a durable DOM (Drawn Over Mandrel), 1-5/8" x 0.157" tube that provides for maximum strength and endurance. These long flexarms will allow you to dial in the correct cater and pinion angles after you lift your Jeep and the bushings, which are factory style, will provide you with excellent performance by damping the noise, vibration and harshness with no maintenance what-so-ever. Whether you go off-road or not, the black e-dipped coating will ensure that your new investment is properly protected against road grime and corrosion.
These flexarms provide an inch and a half of adjustability and removal of the factory control arm bracketry is required (cutting and welding). You will then need to install the TeraFlex Long Flexarm bracketry (sold separately) before installing the new flexarms.
Limited Lifetime Warranty.
TeraFlex extends a Limited Lifetime Warranty on all of its products to be free from defects in material and workmanship. For complete details and terms contact TeraFlex directly. Note: Failure to complete regular maintenance on TeraFlex flexarms (grease every 3,000 miles) will void this warranty.
The TeraFlex Alpine Rear Upper Long FlexArm fits 2007-2018 Jeep Wrangler JK Models.
The TeraFlex Rear Upper Long Flexarm is available individually for either the driver or passenger side, and is also sold as a pair. It requires the TeraFlex Long Flexarm bracketry which is sold separately.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov