(approx) 1 Hour
Simple installation for anyone.
$108.99 (pair)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Specs. Teraflex offers this pair of wheel offset adapters as part of a great wheel and tire upgrade for your Jeep Wrangler JK. The adapters are made of durable and solid billet aluminum and will give you long-lasting performance and confidence, especially when you stand back and appreciate your offset.
Aluminum Construction. The spacers are made from the finest materials and come with wheel studs already pressed in. Lug nuts are also included. If your vehicle has larger tires or needs better clearance, this is just what you need to get the most of your Jeep. The set comes backed by a lifetime warranty for added peace of mind.
Application. This pair of Teraflex 1.25 in. Wheel Offset Adapters is designed to fit on the the 2007-2018 Wrangler JK models.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
August 21, 2019
I was worried about putting wheel spacers on my Jeep because I had heard so many horror stories. But its been over six months and I have had no issues. They are a great product and high quality.Helpful (1)
August 05, 2019
Perfect spacer to run 285-75-18 on my 15 jk with leveling kit no rubbing with turn.Helpful (0)
May 22, 2019
Easy install and removed the tire rubbing on the sway barHelpful (0)
April 13, 2019
Did the job and give a much better stance. Great quality. Fast shipping.Helpful (1)
March 15, 2019
Top notch fit and finish
These 1.25” spacers did the trick. My 2019 Rubicon wheels no longer rub at full turn on my 2014 Sahara. I used the red-loctite on the threads, and will be sure to check the lug nuts with a torque wrench soonHelpful (0)
March 04, 2019
Smallest spacer offered. Was looking for 1 inch
Went with the 1.5" terraflex because they seemed reputable. Extremeterrain carries alot of their parts so one can only assume they are of decent quality. I was hoping for a 1" spacer, no luck. I do notice now the rear have a wider stance than the front which is funny considering its was just opposite of that before the install. Did have to cut the studs down for a correct fit. 50miles on them now, so far so goodHelpful (0)
January 26, 2019
Teraflex 1.25 in. Spacer review
Product fits well. Had to purchase these due to rubbing with my 35's on stock wheels. It's no longer a problem and I'm loving the stance these added to it.Helpful (3)
January 20, 2019
Great Brand, Great product!
Spacers are extremely well made. I only put Teraflex on my Jeep because the quality is superb.Helpful (5)
November 18, 2018
2014 Jeep 2dr
Installed the Teraflex 1.25 in. Wheel Spacer/Adapters of a 2014 Jeep 2dr Wrangler with the stock 16x7in steel wheels. The workmanship is impressive, as is the packaging. Installation was very straight forward. So far so good. The 1.25in added spacing vs 1.5in is perfect/just enough for what was needed on this Jeep. Note - on the front the factory wheel studs do not protrude past the spacer surface, on the rear this does happen, so as the instructions very clearly state, depending on what type of rim being used, some trimming of the studs will be required. As stated by others, this is not an issue with the factory steel rims due to the rim mounting surface having a recess right where the stud would contact. Hope this helps.Helpful (7)
October 10, 2018
Allowed me to keep stock Willys wheeels, run 33” tires, no rubbing and tires sit flush with fender flares.Helpful (6)
I have a 2016 Sahara Unlimited. I just installed 275 70 18 Dura Tracs on the stock Sahara wheels. Due to rubbing, I would like to install these 1.25 in spacers on my Jeep. Will it be necessary to cut down the stock studs to make the wheel mount up against the spacer. I'm afraid the 1.5 inch spacers will place the tires to far out past the stock fenders if I decide to go with the larger spacer.
Stud cutting is not required when installing these.
Have mammoth 16×8 with 4.5 back spacing. Purchased a after market tie rod that requires 17 inch rims without realizing.. Installed it. Only rubs at full turn. Jeep iso not being driven. Would these spacers help? Or should I just buy new rims?
Would these get rid of the clearance issue for a 35inch wheel set without any lift to keep my Jeep Wrangler 2012 low and avoid extra lift cost ?
No, the Teraflex 1.25 in. Wheel Offset Adapters would not allow you to clear a larger diameter tire. These can be used to help clear a wider tire on factory wheels, but not a larger diameter. You will need a lift and/or aftermarket fenders to clear 35" tires.
Will these work for both the front and rear the same?
Yes, this would be just fine for both front and rear.
Are these hubcentric ?
Yes, the Teraflex 1.25 in. Wheel Offset Adapters will be hubcentric.
This wheel adapter will work for both aftermarket and stock wheels.
These will push the wheels out far enough and will get rid of the rubbing.
Yes, these would work on the stock wheels if you wanted to use wider tires.
The lugs on theTeraflex 1.25 in. Wheel Offset Adapters will be 1/2"-20 UNF x 1.7" Long.
The Teraflex 1.25 in. Wheel Offset Adapters will work on your stock Willy's wheels!
These Teraflex 1.25 in. Wheel Offset Adapters, in addition to all of the spacers and adapters we offer are only sold in pairs.
The Teraflex 1.25 in. Wheel Offset Adapters are hub centric wheel spacers.
Hello, although advertised as adapters these are Spacers only and they have the bolt pattern for a 07-17 JK Wrangler.
(approx) 1 Hour
Simple installation for anyone.