Smittybilt SRC Cage Kit - 6 Piece - Gloss Black (07-10 Jeep Wrangler JK 4 Door)

While it does not bolt to the floor, it does stiffen the factory roll cage.

Yes this item attaches to the dash, you would have to remove the side panels of the dash and use the drill template, to make the mounting points for this roll cage. This can be seen on step 4 of the install guide, here is a reference and visual of the installation guide: https://lib.extremeterrain.com/guides/J17534_Guide.pdf

Yes modifications would be required as well as custom brackets to try and make this work on a 2017. I would recommend purchasing the correct kit for you vehicle which can be found here: https://www.extremeterrain.com/smittybilt-src-cagekit-6-piece-glossblack-1017-jeep.html item # J17544.

Hello, although there is a bar that comes across the front you shouldn't have any problems removing your freedom panels.

Unfortunately the Smittybilt SRC Cage Kit - 6 Piece - Gloss Black (07-10 Wrangler JK 4 Door) will not fit your 2016 Wrangler. There were some modifications to the JKs in 2011 as well as in 2012 which would prevent this from working with the 2011 and newer.