Skid Row Off-Road Engine/Transmission Skid Plate (91-95 4.0L Jeep Wrangler YJ)Find parts that fit my vehicle

Our Skid Row Offroad Engine/Transmission Skid Plate was designed to fit your 1987-1995 Jeep YJ Wrangler with the 4.0L six cylinder engine.

Material: Made of 3/16 inch thick steel
Finish: Semi-Gloss Black Powder Coat
Hardware: All Grade 5 zinc plated hardware is included
Shipping Weight: 48 lbs
Origin: Made in USA

--Separate designs for the 4 cylinder and 6 cylinder engines assure that the skid fits and works properly. No one else makes a custom fit skid plate to protect the engine and transmission of your YJ. Nobody!
These skid plates are made of 3/16" thick steel that is laser cut and CNC folded for consistent quality that sets the standard for Jeep skid plates. They are also reinforced with 1/4" thick steel angle along the driver's side to provide plenty of strength while easily clearing both your exhaust system and your driveshaft. (Most of our competitors have interferences with one or the other, but not Skid Row!) Our skid plates are also sand-blasted prior to being powder coated to assure that the finish adheres better than our competitor's coatings. We use a semi-gloss black for an attractive finish that's easy to touch up when necessary.
They mount solidly to the Jeep's frame and are specially designed for easy bolt-up installation with minimal drilling. Only two holes will need to be drilled through the leading edge of your transfer case skid plate for the carriage bolts that hold the two skids together. In addition, an oil drain hole has been provided to make changing your oil possible without removing the skid plate.
We've also learned during our off-road testing that these engine skid plates help you get over obstacles by preventing your transfer case skid plate from catching on whatever you're driving over. So you not only get added protection and peace of mind, your Jeep will be more capable as well!!

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov