(approx) 30 Minutes
Simple installation for anyone.
$76.99 (kit)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Includes. This kit from Rugged Ridge has both front and rear splash guards.
Function. These splash guards protect your vehicle's bottom and lower side panels from water and mud splashes as well as any road or trail debris.
Construction. These Jeep Wrangler accessories are made of injection-molded TPE material that can be painted or customized to suit your Jeep's style.
Fitment. This Rugged Ridge splash guard kit is designed for 2007-2018 Jeep Wrangler JK models.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
July 14, 2019
Rears are awesome. Fronts not so much.
Rear mudflaps are super easy! On in like two minutes! Fronts are terrible. They give you these clips to put over the holes but where they put the two inner holes, the clips won't fit. Had to drill two more holes in the mudflaps to be closer to the edge. Then the washers they give you are about a hair bigger than the hole in the mudflap, so those would rip out super easy!!! After drilling our own holes, using our own washers, and then spray painting the washers they look good!Helpful (3)
May 04, 2019
Mud and dirt would splash down the side of RUBI my wife named it added the preformed mud flaps did away with my problem love them clean sidesHelpful (1)
February 22, 2019
Works Like It Should
The only issue I have with this product are the clips used for the install. They were not nearly long enough but where there's a will there's a Depot with the right size. Install was easy and only took an hour or so for the front and back.Helpful (3)
February 06, 2019
Easy install but hardware not the best. I had hardware before install and when I finished install the splash guards look great and have stopped sand and salt from hitting my paint!Helpful (4)
January 10, 2019
Was easy to install I had to slip the front nuts inside the existing Plastic to make the nuts workHelpful (5)
November 05, 2018
have blown holes thru them
I live on 4 miles of graded dirt road, less than 1 year they have holes thru them. great for city slicker jeeps but not for even minor off road driving. I may glue some rubber inside to see if that will help with defection/cracking the plastic.Helpful (8)
November 01, 2018
Easy to install. They look great on my Jeep Wrangler.Helpful (5)
October 30, 2018
Bought both the front and back flaps. Took only but 15minutes to install and they fit great. Thnx rugged ridge. ~EvaHelpful (5)
October 10, 2018
No more mud on the rear fender flares. Love this product. Now lower your prices on nerf bars and wheels and I’ll really spend some $$$Helpful (5)
September 11, 2018
Good fit and construction, however the washers are to small for the holes. I also wish that the screws and washers were stainless so they wouldn’t rust. But over all a good product.Helpful (5)
To be clear, these will fit the rear steel bumper of the 75th Anniversary Edition 2016 Wrangle JK? I bought the Mopar ones and the rears would not fit flush. Just want to ensure these are a perfect fit in the OEM steel 75th bumper? It a bumper like the Hardrock.
Thank you for your question! These are designed very similar to the Mopar splash guards, and they will not sit flush with the steel rear bumper.
I’m about to install the Rugged Ridge Side Step Bars - Stainless Steel (07-18 Jeep Wrangler JK 4 Door) for $199 on my 13 wrangler jku 4 door with factory bumpers fenders so I’m wanting to verify these will fit without modifications or rubbing.
These will work together yes.
how do these attach? Do wheels need to be removed? Are there clips or do they get bolted? If bolted, do holes need to be drilled?
The Rugged Ridge Splash Guard Kit will install using some factory bolt holes and require some drilling. You can reference the install guide here: https://lib.extremeterrain.com/guides/J101154-manu.pdf. It would be easiest to remove the wheels for install so you have the most room.
Will these work on the front with a 2.5 inch lift, 1 inch spacers, and a Westin 4" HDX drop step nerf bar?
I have 2 door WRANGLER RUBICON /RECON THAT IS STOCK. There rockrails/step. This came from the factory this way. Rear splash are not the problem. The problem is the rockrail. Do you have a product that allows for these? It appears to be a problem.
Please send the question and any pictures of issues to email@example.com . These do seem as though they should work with the rock rails.
Yes, the Rugged Ridge Splash Guard Kit would work with your 2017 Willy's edition.
This Rugged Ridge Splash Guard Kit will work with most side steps, however with the myriad of combinations we have not confirm these guards with RedRock 4z4 3 inch side steps.
The Rugged Ridge Splash Guard Kit attach directly to the OEM Rear Bumper, so this would be needed unless you fabricate some form of custom bracket.
Yes, you shouldn't have any issues installing the Rugged Ridge Splash Guard Kit with your factory running boards.
Yes, the Rugged Ridge Splash Guard Kit will fit your 2011 Sahara Unlimited but they are designed to be fitted to factory front flares and factory rear bumper so if you have aftermarket fender flares or rear bumpers, they may not fit properly.
Rugged Ridge Splash Guard Kit will not fit on a Rubicon. These will only fit models with the plastic bumpers.
Hello, yes these will work on your 2017 Jeep 75th anniversary Sahara unlimited.
Hello, yes these will work on your 2017 Rubicon.
The Rugged Ridge Splash Guard Kit - Front & Rear (07-17 Wrangler JK) are made for and have guaranteed fitment on 2007-17 Jeep Wranglers not the Jeep Renegade.
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box