Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!

Rough Country Rear Bumper Brackets (07-18 Jeep Wrangler JK)

Item J13930
ExtremeTerrain no longer carries the Rough Country Rear Bumper Brackets (07-18 Jeep Wrangler JK). Please check out 2007-2018 Jeep Wrangler JK Bumper Accessories for an updated selection.

Features & Details

  • Rear Bumper Brackets
  • For Use with 1.25 Inch Body Lifts
  • Eliminates Gaps
  • Steel Construction
  • Black Powder Coat
  • Raises Rear Bumper
  • Fits 2007-2018 Jeep Wrangler JK Models
Construction. These four brackets by Rough Country eliminate the gap that's left between your Jeep Wrangler JK's rear bumper and its body after you install a body lift. Though a body lift increases ground clearance and enables use of big, torquey aftermarket tires, it does create a few fitment problems that need correction. These brackets raise the rear bumper enough to get rid of the gap.


Specs. Two center brackets and a passenger's side and driver's side bracket make up this steel kit by Rough Country. The parts are finished with durable black powder-coated paint, defeating rust and corrosion. This kit is meant to be used with JK and JL Wranglers that have a 1 ¼ inch body lift.

Accessories & More. These brackets use the stock hardware from the factor installed rear bumper brackets.

Application. Fits 2007-2018 Jeep Wrangler JK Models with a 1.25 inch body lift installed.

Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (4) Rear bumper brackets
Installation Info
Tech Specs

    Customer Photos (1) Submit Your Photo

    View 1 Photo

      Questions & Answers (4)

      4 Top Rated Questions

      Do these brackets work with the Recon bumpers or do u sell an extension piece for the 4 bolts into the hitch?

      • The Rough Country Rear Bumper Brackets are intended for stock and aftermarket bumpers. We don't carry anything for the hitch at this time.

      Helpful (0)

      Will this work to fill the gap from a 1 inch body lift?

      • The Rough Country Rear Bumper Brackets are intended to be used with a 1.25" body lift, to help raise your rear bumper to eliminate the gap.

      Helpful (0)

      Will these hold the weight of an aftermarket metal rear bumper or are these brackets just for the factory plastic bumper?

      • The Rough Country Rear Bumper Brackets will work with stock and aftermarket bumpers.

      Helpful (0)

      Good day Do the rough country rear bumper brackets fit on aftermarket steel bumpers as well or only standard stock bumpers? Hope to hear from you soon Kind regards

      • Hello, yes, you should be able to use these brackets on any bumper that uses the stock hardware from the factory installed rear bumper brackets.

      Helpful (0)
      Post Your Question

        Customer Reviews (5) Write a Review

        Overall Rating 5

        out of 5 stars

        • Fit 5 5
        • Bang For Your Buck 5 5



        • 5/5

          June 26, 2018

          Fit perfectly

          Esay install 16 mm took 30 min wear safety glasses dirt in eye sucks

          JoeyD

          Year: 2013Submodel: Wrangler

          Helpful (12)

        • 5/5

          February 21, 2018

          14 JKU

          Fit perfectly after adding a 1.25” Teraflex body lift.

          PatM

          Year: 2014Submodel: Wrangler

          Helpful (13)

        • 5/5

          October 23, 2017

          Easy Install on Stock Bumper

          Easy to follow instructions and easy to install using basic tools. These brackets closed the gap between the body and the stock bumper when I installed a Teraflex 1.25" body lift.

          MC106

          Year: 2016Submodel: Wrangler

          Helpful (13)

        • 5/5

          March 09, 2017

          Great addition to a 1.25" body lift

          I ordered the RC rear bumper relocation brackets with my 1.25" body lift to keep the factory body lines in the rear. Moves the bumper up to eliminate the gape after a body lift. Very easy install, no drilling.

          WadeH

          Year: 2010Submodel: Wrangler

          Helpful (12)

        • 5/5

          October 16, 2015

          Very happy with these brackets

          I used a different body lift. After the install the rear bumper was very noticably low. Glad I found these brackets sold seperate from the kit. Installed in about 30 minutes. Thanks Rough Country

          JeepNerd

          Year: 2014Williamsport, PA, USA

          Helpful (13)

        Related Wrangler Categories