How to Install Rightline Gear Side Storage Bag - Black (07-18 Wrangler JK 4 Door) on your Jeep Wrangler

1. First insert the plastic bag shapers into each bag as shown.

2. Then stuff your bag with whatever gear you need through the 2 main compartment zippers.

3. Place the passenger side bag behind the rear seat as shown.

Note: If you have a rear seat recline kit the bags will fit pretty tight, but they do still fit. 

4. Using the attached straps, route the top front strap over the roll bar, and the top rear over the seat belt bracket as shown and tighten the straps as necessary. Make sure the strap does not interfere with seat belt operation.

5. Use the rear strap to wrap around the roll bar base as shown, and tighten.

6. Repeat steps 1-5 for the driver side bag.

Installation Instructions Written by ExtremeTerrain Customer John Parker 1/8/2018.