Installation Time: (approx) 2 Hours
Difficulty Level:Light to Moderate mechanical skill required.
Installation Guides:
Free Shipping on Orders Over $75. Details
$109.99 (kit)
FREE ShippingSaved - View your saved items
We're sorry. We couldn't save this product at this time.
Current Item:
RedRock 4x4 Rear Double Tube Bumper Guard - Gloss Black (07-18 Jeep Wrangler JK)
Total Price with All Options:
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
I'm Ryan from ExtremeTerrain.com, and this is my review of the RedRock 4x4 Rear Double Two Bumper Guard fitting all 2007 to 2016 JKs. The factory rear bumper on the jeep is nothing but a plastic shell, and it can be collapsed or crushed in very easily. If you're looking to add a little bit of protection to that factory rear bumper, this is a nice option. For those of you who don't have the need or the budget for a full, heavy duty plate steel bumper or the features that one of those bumpers adds, this is a much less expensive option that will still add protection. This bumper guard is built from tubular stainless steel that's covered in a gloss black powder coat, so it's going to look pretty good no matter what color your jeep is and what other accessories you might have added to it. This is designed to be completely bolt on with your factory rear bumper. However, it probably won't work with an aftermarket bumper. This is designed to provide some protection when parking. However, this isn't going to provide a great deal of protection for off-road scenarios. If you are somebody who wants to go off-road and wants a heavy duty bumper to protect their body in that scenario, one of those plate steel bumpers that is going to provide more protection would be the place to look. As I said, this is designed to be completely bolt on. The first step in the installation process is to remove your factory rear bumper to allow access for installing the included brackets with the included hardware for the bumper guard. Once those brackets are in place, you can replace the rear bumper and then put the bumper guard on the jeep. The whole process shouldn't take you more than two hours, and you won't need anything but some traditional hand tools. Because this is designed to provide some light protection for parking lots and not heavy duty protection for off-roading, this is going to be significantly less expensive than a heavy duty off-road bumper. And you would expect it to be, because it doesn't have the features of one of those bumpers. So, if that's what you're looking for, some light protection for an on-road situation, this is a nice option that will save you money over those heavy duty bumpers. If you don't have the need for a heavy duty off-road bumper, the features and the costs that go along with it, but you do want to add some protection to your really lightweight factory plastic rear bumper for on-road situations, this is a nice option that's lightweight, and will save you some money. That's my review of the RedRock 4x4 Rear Double Two Bumper Guard fitting all 2007 to 2016 JKs that you can find right here at ExtremeTerrain.com.
Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
MPN# J100567
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Time: (approx) 2 Hours
Difficulty Level:Light to Moderate mechanical skill required.
Installation Guides:
So does this fit a15 Hard Rock Rubicon bumper......
This is able to work along with the 10th anniversary bumper on the Rubicon hard rock edition.
Will this fit with a Versa-hitch? Thanks.
The RedRock 4x4 Rear Double Tube Bumper Guard will work with a hitch yes.
Is this guard available in stainless to match the grill guard I already have?
This RedRock 4x4 Rear Double Tube Bumper Guard is only offered in the gloss black at this time.
Will this bumper guard fit Rubicon Hard Rock edition bumper?
Hello, unfortunately we have not test fitted this with the Rubicon Hard Rock bumper, so we wouldn't be able to guarantee fitment.
I have a aftermarket (RuggedRidge) tow-hitch installed on my 2016 JK Sport Unlimited, will the RedRock 4×4 rear double tube bumper guard fit?
Hello, yes, the RedRock 4x4 Rear Double Tube Bumper Guard - Gloss Black (07-17 Wrangler JK) will fit with a Tow-Hitch installed.
Hello, you will be able to use the RedRock 4x4 Rear Double Tube Bumper Guard - Gloss Black (07-17 Wrangler JK) with your Gibson Split exhaust, but the tips will probably be pointing straight at the lower tubes of the Bumper Guard.
Hello, the RedRock 4x4 Rear Double Tube Bumper Guard - Gloss Black (07-17 Wrangler JK) will clear the stock trailer hitch, so it can be still be used as normal.
Installation Time:Afternoon
Installation Cost:$100-$250
Installation Time: Less than 1 Hour
December 26, 2018
Ghost Wrangler
Redrock rear bumper guard fit great. Installation was a piece of cake. Everything lined up perfectly and looks great installed.
Installation Time: Less than 1 Hour
October 25, 2018
Bumper protection
Product was well packaged. Only complaint was instructions were very lacking!
Installation Time: Less than 1 Hour
August 26, 2018
Great Buy
Great protection and a great look. Had Friends help to install.
Installation Time: Less than 1 Hour
June 09, 2018
Fits the steel bumper.
Installed it in the steel bumper. Easier than the plastic bumper. No need to remove the steel bumper for install. Trailer hitch and grab hooks still accessible. I hope the paint won't chip.
March 31, 2018
Love it!!
It was super easy to install and it looks great. Awesome purchase.
Installation Time: Afternoon
January 22, 2018
Looks great!
Looks great! It took about 90 minutes to install and not only does it give a little more protection in parking lots, it gives the rear end a little personality of it own.
Installation Time: Afternoon
November 09, 2017
Reed Rock Rear Double Tube Bumper
Great tube for the price. Really dresses-up my JK. Easy to install and looks great. Awesome value.
Installation Time: Less than 1 Hour
August 09, 2017
Great Alternative to a 95lb Bumper!
I was needing some extra protection for my stock bumper and just didn't need a heavy metal bumper for the type of activity I use my jeep for (Camping and Canoeing). I have a roof rack and frequently need to access it from the rear bumper. The factory bumper has begun to crush down for using it as a step. I installed the RedRock 4x4 Rear Double Tube Bumper Guard to use as a step instead of the wimpy plastic factory bumper. Bottom line it works great for that! The install is complicated from the prospective of the instructions being difficult to understand. The install could be easier with some better pictures as some of the written instructions are hard to envision with the provided photos. Once you maneuver an awkward factory bolt with a rod welded to it (I had to bend the "rod" on mine to make it work) the rest of the install was a snap. You'll need two people on this install not that the bumper is so heavy but the whole assembly is just a to unwieldy to do alone. The construction is well done, the materials heavy. I weigh 230 lbs and standing on this guard it was rock solid. The finish is a semi-gross black powder coat. I plan on adding some grip tape to to the tops of the tubes just to enhance the safety when I use it as access point for my roof rack. Well priced, high quality and looks great- what more could you ask for?
Installation Time: Shop Install
August 08, 2017
Mall crawler
Just what I needed. Looks great on my 16JKU plus adds a little extra protection.
August 08, 2017
Easy install
Wouldn't be much for protection, but it looks nice and only takes about 15-20 minutes to install
Installation Time: Less than 1 Hour
June 21, 2017
Very simple!
Was easy to put on. Its very light weight but gives me so peace of mind in parking lots versus the plastic factory bumper.
Installation Time: Less than 1 Hour
May 23, 2017
Fabulous
This red rock number guard not only looks great, it protects well too. Very easy to install and I get such wonderful compliments from other wrangler owners, as well as the all time infamous "where did you get that, and what type of wrangler is this...your JEEP is sssooo beautiful!" Thanx extreme terrain and red rock for making my JEEP fabulous!
Installation Time: Afternoon
April 26, 2017
RedRock 4x4 Rear Double Tube Bumper Guard
The bumper guard makes the Jeep look more off road. It protects the stock bumper from regular street drivers. I think it looks GREAT!!
Installation Time: Less than 1 Hour
April 21, 2017
hello Jim here Taylor,Mi
The Red rock rear tube bumper guard appearance is great, it took only 1 hour to put on ,it fit with no trouble, the instruction was easy to read,if you have dual rear- pipes No problem.for the money its great.love it
Installation Time: Shop Install
Installation Cost: $100-$250
April 06, 2017
Solid rear Bumper Guard
The new rear bumper guard looks great and matches the front grille guard!! Excellent product, highly recommend
Installation Time: Afternoon
February 10, 2017
Works Great!
Looks great and pretty solid once installed. Only issue I had was the instructions was not too detailed and the pictures aren't even clear enough to make out. But I installed it all by myself and it helps to use the stock bolts where the stock bumpers mount to hold the brackets in place, this will help position and mount the brackets with the supplies nuts sms washers.
Installation Time: Less than 1 Hour
February 10, 2017
Great
Easy to install with basic hand tools looks great.
Installation Time: Afternoon
Installation Cost: 0-$100
September 30, 2016
Great Great Idea and Value!
Easy to put on, but a pain if you're alone. It comes with some brackets to put it to the holes on the bottom of the stock bumper. It's almost mandatory that you need two people. I really really like it though, the instructions could have been a bit better though. My only "gripe" is that it's a bit light. One one hand I was hoping for something really heavy and solid feeling so to give me the piece of mind that it's like a brick wall if someone rear ends me. lol, That being said,I like that it's sort of light because it won't drag down the MPG. Overall I'm liking it, if you buy it, get someone to help you out with it. Definitely worth the money if you're looking for something to go over your current bumper! I was exactly what I was looking for.
Installation Time: Afternoon
September 11, 2016
Great look and easy to install
Took me 1 1/2 hours to install. The only problem I really had was with the directions. The pictures don't tell the whole story and you have to figure out things for yourself. Looks great and gives my jeep some extra support.
Installation Time: Less than 1 Hour
September 08, 2016
Well worth the money
This is a great product for someone that's not off road all the time and very easy to install arrived in perfect condition love the look on my jeep just what I was looking for without spending big bucks on a heavy duty bumper