Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler!! Enter daily!
Win $4k In Rugged Ridge Parts! Enter Daily!

RCV Performance Products Ultimate Dana 44 CV Front Axle Set (07-18 Jeep Wrangler JK Rubicon)

ExtremeTerrain no longer carries the RCV Performance Products Ultimate Dana 44 CV Front Axle Set (07-18 Jeep Wrangler JK Rubicon). Please check out 2007-2018 Jeep Wrangler JK Drivetrain for an updated selection.

Features & Details

  • Dana 44 CV Front Axle
  • Steel
  • Made from Aircraft Quality Materials
  • The Boot is Made from High Durometer Urethane
  • Does Not Include Yoke Ears
  • Packed with Grease
  • Comes with Manufacturer's Warranty
  • Fits 2007-2018 JK Wrangler Rubicon Models
Specs. If you want a strong, durable upgrade to your JK Rubicon, then you want the RCV Performance Products Ultimate Dana 44 CV Front Axle Set. This product is made from incredibly durable, aircraft quality steel, and uses the same technology that's used in the Dana 60 CV. It's smoother than a typical u-joint, because it doesn't have a knuckle bend. There's also minimal maintenance and no yoke ears to contend with.

Construction. You'll be impressed with the patented high durometer urethane boot that keeps this joint safe from debris and tough weather. The constant velocity means better traction, and the part comes packed with grease. You don't have to worry about c-clips, and the manufacturer covers this part with their "You break it, we replace it" warranty.

Application. This CV rear axle works with 2007-2018 JK Wrangler Rubicons.

Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details

MPN# CVJ44-JK

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Left Axle Shaft
  • (1) Right Axle Shaft
Installation Info
Tech Specs
Will it fit my Wrangler?

    Customer Photos (4) Submit Your Photo

    View All 4 Photos

      Questions & Answers (1)

      1 Top Rated Question

      Hi, I have a 2009 Jeep Rubicon Unlimited and wanted to replace my front axle shafts. I really would like to purchase these, just had a question, I have read and heard from a few people that if you have a stock hub you might need to grind a part of the hub for these to install correctly? Ive watched a few videos that does not show grinding at all and they are a direct fit with the included bolts.. Could you let me know if these are the right ones for my vehicle and also if they are a direct fit or what is need to install. Thanks so much Joe

      • Hello, As per RCV: RCV Ultimate CV axles for Jeeps are designed to simply fit in place of your OE axle shafts. Minor clearance modifications are only needed for SJ, TJ, LJ and XJ models. The process is simplified with use of an RCV clearance gauge included with the axle set.

      Helpful (0)
      Post Your Question

        Customer Reviews (6) Write a Review

        Overall Rating 5

        out of 5 stars

        • Fit 5 5
        • Bang For Your Buck 4.833333 4.8



        • 5/5

          April 23, 2019

          New found confidence!

          I’m no longer worried about my D44 axle shafts. RCV has a great reputation and I’m happy to have my set. Install was straight forward based on instructions (several good videos available). Packaging protected the product well, everything was in the box. Pricey but worth every penny in my opinion. Remember this, the bitterness of poor quality lingers long after the sweetness of a low price. You can purchase these with confidence.

          L

          Year: 2017Submodel: Rubicon

          Helpful (1)

        • 5/5

          March 10, 2019

          I like!

          I have had these on for a little over a month and so far so good. My 1 advise is once you see the gap in the axle, you might want to consider axle seals and unlike me I had to tear everything apart again to mount the seals. So I suggest buy the seals, so you don't have to do it twice.

          StevenM

          Year: 2018Submodel: Rubicon

          Helpful (0)

        • 5/5

          January 03, 2019

          Last Axle you will ever buy!

          Last axles you will buy! The fit and finish is outstanding! The ride is some much smoother. You can turn and put the power down with no problems!

          ArtV

          Year: 2016Submodel: Rubicon

          Helpful (4)

        • 5/5

          June 22, 2017

          Perfect for anyone wheeling hard with 35 tires

          If you haven't ever felt that sinking feeling from the tell tale snap while crawling or wondered how the heck your axle could break in the snow, sand or mud and you run a Dana 44... You probably will. An upgrade is required when running 35's . When it came time for me to upgrade I was skeptical about the hype with RCV's but after running these things with heavy Toyo 38's on a 44 I'm impressed so far. I've been snow bashing super hard and crawling in Colorado and they've not let me down so much that I think about leaving the spare at home. There is no bind at full steering lock unlike U joints and more torque is delivered. There is a clicking noise at full lock in 4wd. Install is easy and I had no fitment issues on 13 jku

          ShawnB

          Year: 2013Submodel: Wrangler

          Helpful (14)

        • 5/5

          March 05, 2017

          Awesome quality!!!

          Installing these this weekend, they look amazing and were shipped and at my door super fast. I have heard nothing but great things about these and can't wait to get them on. Thank you so much!!!!

          JosephV

          Year: 2009Submodel: Rubicon

          Helpful (12)

        • 5/5

          March 22, 2014

          great upgrade

          For the money these axles are great, they where alittle difficult to put in then regular axles but well worth the time and effort.

          mattw

          Year: 2008Arkansas, USA

          Helpful (10)