Raxiom 50-Inch LED Light Bar Windshield Mount (07-18 Jeep Wrangler JK)

Video Review & Installation

Hey. What's up, guys? I'm Ryan from ExtremeTerrain and today I'm here with the Raxiom 50 inch LED light bar windshield mount, fitting your 2007 to 2017 Wrangler JK. It's for anyone looking for an affordable and easy way to mount their 50 inch light bar. These brackets are going to keep the light bar at the top of the windshield conveniently out of your way and not really blocking your view. Now these brackets are intended for the Raxiom light bar. However, they will fit most 50 inch light bars. These are made of heavy-duty steel plating and they have a black powder coating which is going to add corrosion resistance and an aggressive look. And these are an easy bolt on and they come as a complete kit, making for a very easy install. Of course, there are other options that are higher quality, however they can cost up to twice as much. I think for the price at around $100, this is one of your best options to go with and, of course, it's gonna get that light bar up and mounted on your rig. As far as install goes, I am going to give this a one out of three wrenches, since you can install it in about 30 minutes using simple hand tools. With that being said, let's hop into the install. We're going to begin this installation by removing our factory bolts out of our windshield pillars so we can attach our brackets. Then we're gonna to do these three here, not this bottom one just these three. You're gonna do both of these front ones here. We're using a T40 Torx. You're gonna do the same thing for the other side, moving the two fronts and the three on the side. So before we install our bracket, we're gonna install our foam gasket material. This is to add a layer in between the bracket and the paint surface so we don't scratch it. So we're just gonna peel this backing off and then we'll attach it to our bracket. So next, we're gonna place our bracket on and we're going to use the supplied bolts that they gave us to install this under the Jeep. Yeah, we're gonna do the same thing for the other side, peeling this backing off first, just guarding that. We're gonna do our best to line up these holes. So I'm going to start with these outside three holes here and get those lined up the best I can. Make sure that you tuck this down in this little V and then we're gonna line up these other holes. Once that's stuck on real nice, I'm gonna attach it to our Jeep. So I'm gonna start with these two front ones. We're gonna leave everything pretty loose, because we still have to get our light bar in. So now that the light brackets are fully installed, you're gonna wanna install your light bar first before you tighten those bolts up. That way you have some room to slide them back and forth and get that installed. So we're gonna install our light bar and show you how everything looks and then we'll tighten those bolts up. So after you have your light bar installed, you can go and tighten your brackets up. So that's gonna wrap up my review and install. For more videos like this, check us out at extremeterrain.com.