(approx) 45 Minutes
Simple installation for anyone.
$337.99 (pair)FREE Shipping
Hey guys. Today I'm here with the Pro Comp seven inch round LED headlights fitting all 2007 to 2018 JK Wranglers. This is gonna be a great option for you guys out there looking for a full replacement to a burnt out bulb or you're just sick and tired of your stock headlights. These are gonna give you a stealthy look cleaning up the front and aesthetically and the lighting is gonna be a lot cleaner as well, increasing your performance. Not to mention, these are gonna match with any other LEDs that you pair with it. At the moment, these are gonna be averagely price at around $300 on the page right now. When it comes to choosing headlights, it really comes down to personal preference in the design. However, I think that Pro Comp did a really good job at durability as well as the quality of materials used. Install is gonna be a very easy one out of three wrenches and is all plug-and-play. So speaking of the install, let's jump into that now. The tools that we used for this install were a ratchet, a flathead screwdriver, an extension, and T15 Torx bit. So our first step is to pop our hood and remove the six pop clips that are holding on our grille. So you can use a flathead screwdriver or a trim removal tool. A flathead screwdriver might be a little bit easier for these guys. Just be careful that you're not damaging your paint. Now we can pop our grille off, being careful of the turn signal wiring harnesses. Now we can disconnect our turn signals. Now we can pull off our grille. Now we can use a T15 Torx bit to remove the four bolts that are holding in the trim that's holding in our headlight. I'm using an extension because these are little and a little bit hard to access. Now while taking out this last bolt, make sure that you have a handle on your headlight because it will fall out if you don't have your hand on it. Then you can disconnect your wiring harness. Now we can repeat the process on the other side. So as far as looks go, the Pro Comp LEDs will have a black housing which will make them look a lot stealthier than your stock housing. With looks, you're also getting a lot more durability out of these. These will have a polycarbonate lens, which basically means that they'll be able to take a hit on the trail and be very strong. However, they're still gonna offer full transparency. With the durability, you're also getting the sealed back. So since these are sealed with an IP67 rating, no dust or water will be able to get inside and hurt the LEDs. So like I mentioned before, you are gonna get a cleaner light out of these new LEDs and that's because of the color temperature. The Pro Comp LEDs will have a 6000K color temperature at a bright white light while your stock halogen bulb will sit at roughly a 3,000 Kelvin raining which will give it that amber hue. So enough about the stock lights let's bolt in our new headlights. So before we put in our headlight, we have to transfer over the trim from our stock headlight on to our new headlight because that's what's gonna be holding it in. So now we can plug in our headlight. So these will have top labeled on the top. So after it's oriented in the correct way, we can take our trim piece and bolt it back up. So now you can finally press the harness in and pull the clip down. Before you pop your grille back on, I would recommend that you adjust your headlight so you're not blinding oncoming traffic. You can do so with the same T15 Torx bit that we used to install the headlights but there will be an adjustment bolt on the left and on the right of both of the headlights. So now we can pop our grille back on and reattach the six pop clips that are holding it on. After our grille is on, we can plug our turn signals back in. So after our front is all buttoned up, we can close our hood. So that's gonna be it for my review and install. If you have a 2007 to 2018 Wrangler, you can check out these Pro Comp LED headlights right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Cutting-Edge Technology. If you are looking for top-quality in headlights, look no further than the Pro Comp 7 in. Round LED Headlights. This incredible headlight provides a grander lighting performance both on and off road. With a UV-resistant and hard-coated polycarbonate lens, you won’t be left in the dark with this exceptional manufacturing.
Stellar Engineering. The 20 LUXEON ZES LEDs provide maximum brightness and optimal light dispersion. That means there is a 6000K pure white light factor to these headlights making all other lighting inferior. With plug-and-play replacements and a built-in anti-flicker module, your Jeep’s future will always be bright.
Resourceful Workmanship. These headlights will keep your Jeep lighting visibly shining for all to see. These headlights are compatible with 9-32V DC and is sold in pairs.
Installation. The installation for this product is relatively simple and the installation time is approximately 45 minutes or less.
Life Time Limited Warranty. Pro Comp offers one of the best warranties in the business. A lifetime limited warranty guarantees this item against any defects or flaws in the workmanship or materials.
Application. The Pro Comp 7 in. Round LED Headlights fits all 2007-2018 Wrangler JK models.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
Pro Comp 76402P
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 45 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions