Outta Hand Fabrication Hysteria Front Bumper with Stinger (07-18 Jeep Wrangler JK)Find parts that fit my vehicle

With people pushing the JK/JL platform limits further all the time, the limits of armor need to be pushed too. We have designed the Hysteria front bumper around hardcore offroad performance. This bumper is no wider than the frame rails of your JK/JL/JT. This is perfect for people who are running big tires and have their front axles stretched forward. The amount you cut off the frame isnt a fixed amount like most frame chops. You can keep cutting until your out of room between your winch and the grill or you can modify your grill for even more approach angle!

If you want the absolute best ground clearance, tire clearance and approach angle for your JK/JL/JT this is your soltuion! The bumper even offers the capibility to use your winch as a suck down winch for the hardest of climbs!

This bumper has been tested at King of the Hammer's by Ben at JK Gear and Gadgets and took everything he threw at it with ease!

Specs

• Constructed entirely out of 3/16" HRPO steel.
• Extremely high clearance design, no wider than the frame rails
• Drastic improvement in approach angle.
• Bumper has a hole in the bottom to use your winch for suck down capabilities. 
• 1" thick D ring mounts
• Made in the USA!
• All products come raw, uncoated unless otherwise specified.

Note: This bumper will not fit with the JK Rubicon sway bar. It will work with your JL/JT rubicon sway but will limit how much you can cut at a certain point. 

Application. The Outta Hand Fabrication Hysteria Front Bumper with Stinger fits 2007-2018 Jeep Wrangler JK.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov