Tachometer Gauge (87-91 4.0L or 4.2L Jeep Wrangler YJ)

High-Quality Fresh Gauge. Having a reliable tachometer gauge is critical when off-roading. You need to know precisely how much RPM the engine is producing when driving over challenging obstacles. And if your old tachometer isn’t up to par, there’s no reason to play it by ear. Installing a new gauge into your Jeep Wrangler YJ will give you the extra edge to conquer any terrain.

Superior Lights. With a new Wrangler Tachometer Gauge, you’ll never get left without instrument lighting when you need it the most. The gauge’s ballistic needle does a great job of keeping up with the revolutions, especially with automatic transmission models.

Top-Notch Construction. This is a well-built and durable gauge featuring a galvanized metal housing. The decal is also high quality, and the same goes for the gauge lights. Some lights might not exactly match the stock gauges. However, you’ll hardly notice the difference.

Straightforward Installation. Remove the plastic dashboard cover to access the old tachometer. Unscrew the gauge and unplug all the connectors. Position the new tachometer into its slot and ensure that all the screw holes and plugs match. Once everything is plugged in, test the new gauge to see if it works, then reinstall the plastic dashboard.

Application. The Jeep Wrangler Tachometer Gauge is engineered to fit all Wranglers from 1987-1991. That applies to 4.0L and 4.2L YJ models.

Technical Note. With older Wranglers, you’ll need to replace the old-style plug with the new one. You’ll use the old plug to create a cable that adapts to the new replacement part.

Installation Difficulty. The Jeep Wrangler Tachometer Gauge takes less than 60 minutes to install. It’s a medium-level installation that requires specific technical skills.

Fitment:

• 1987 Jeep Wrangler
• 1988 Jeep Wrangler
• 1989 Jeep Wrangler
• 1990 Jeep Wrangler
• 1991 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov